Biaxial compressive failure criteria and constitutive model of high-strength geopolymer concrete after high temperature

This paper studies the effect of high temperatures (20 degrees C, 200 degrees C, 400 degrees C, and 600 degrees C) and stress ratios (52/53) (0.15, 0.3, 0.45, and 0.60) on biaxial compressive strength and strain development patterns of high-strength geopolymer concrete (HGPC). Experimental observations indicate that HGPC exhibits laminar damage similar to ordinary Portland concrete (OPC) before and after exposure to high temperatures, under biaxial compression. Unlike OPC, damage in HGPC initially passes through coarse aggregates at room temperature but shifts predominantly to the aggregate-mortar interface at 600 degrees C. The biaxial compressive strength envelope of HGPC expands with rising temperatures. The increased multiple of biaxial compressive strength (53/fm) for HGPC at room temperature rises and then falls with increasing stress ratios, peaking at a stress ratio of 0.45 and surpassing the values for OPC and high-strength concrete (HSC). Before high temperature, the modulus of elasticity of HGPC is higher than that of OPC and decreases with increasing temperature, decreasing by about 45-60% for every 200 degrees C increase, and the reduction is greater than that of OPC. The existing failure criterion is not suitable for HGPC after high temperature, this paper develops a new biaxial compression failure criterion for HGPC before and after high temperature based on Kupfer's criterion, taking into account the effect of temperature. The proposed failure criterion calculation results are well in agreement with the experimental data. A damage constitutive model for HGPC considering the effect of temperature and lateral pressure is also proposed, combining the Weibull distribution model for the ascending branch and a modified empirical model for the descending branch. This combined model effectively predicts the stress-strain relationship of HGPC under various temperature conditions.