Large deformation response of a novel triply periodic minimal surface skeletal-based lattice metamaterial with high stiffness and energy absorption

Triply periodic minimal surface (TPMS) lattice metamaterials present superior mechanical performance over traditional strut -based lattice metamaterials due to their unique structural characteristics. However, the high stiffness - stable plastic response trade-off dilemma is still the major challenge for skeletal -based metamaterials. Herein, a novel TPMS skeletal lattice metamaterial is proposed. Finite element simulations are conducted to reveal its elastic properties and plastic response under compression. Afterwards, validation experiments are performed on the lattice specimens fabricated by the most common Fused Deposition Modeling (FDM) process. The nominal stress - strain curves and collapse mode of the lattice materials are obtained accordingly. Both the numerical simulations and experiments demonstrate that the proposed TPMS lattice metamaterial exhibits high specific modulus, strength and energy absorption, together with a smooth and elongated stress plateau, thereby overcoming the strength -efficiency trade-off. Different from the rigid nodal region in traditional strut -based lattices, the strut connection parts in the novel TPMS lattices experience shear and twisting, which avoids the catastrophic failure of the struts and enhances the loading efficiency of the structure under compression. Meanwhile, the numerical results indicate that the stable plastic response of the designed architecture is insensitive to the plastic flow behavior of the bulk material, which is also supported by the experimental results. It is also demonstrated that the novel TPMS lattice metamaterial presents several times higher stiffness as well as energy absorption simultaneously than the current strut -based lattice materials, which can be potentially applied as load -bearing components and impact energy absorbers.