A 3D printed microfluidic particle sorting device

被引：0
|
作者：
Blomdahl, Jacob [1 ]
Putzke, Aaron [2 ]
Measor, Philip [1 ]
机构：
[1] Whitworth Univ, Engn & Phys Dept, 300 W Hawthorne Rd, Spokane, WA 99251 USA
[2] Whitworth Univ, Biol Dept, 300 W Hawthorne Rd, Spokane, WA 99251 USA
来源：
MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS XXII | 2024年 / 12837卷
关键词：
3D printing; microfluidic; particle; sorting; stereolithography;
D O I：
10.1117/12.3002010
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
A 3D printed microfluidic device for particle sorting was demonstrated using syringe-based fluid flow. Flow speeds of 192 mu m/s were shown. This demonstrated an inexpensive, quick and facile fabrication approach to microfluidic particle sorting.
引用
收藏
页数：3
相关论文
共 50 条
  • [1] 3D printed microfluidic device with integrated optical sensing for particle analysis
    Hampson, S. M.
    Rowe, W.
    Christie, S. D. R.
    Platt, M.
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 2018, 256 : 1030 - 1037
  • [2] A 3D printed microfluidic perfusion device for multicellular spheroid cultures
    Ong, Louis Jun Ye
    Islam, Anik Badhan
    DasGupta, Ramanuj
    Iyer, Narayanan Gopalakkrishna
    Leo, Hwa Liang
    Toh, Yi-Chin
    [J]. BIOFABRICATION, 2017, 9 (04)
  • [3] 3D Printed Microfluidic Probes
    Ayoola Brimmo
    Pierre-Alexandre Goyette
    Roaa Alnemari
    Thomas Gervais
    Mohammad A. Qasaimeh
    [J]. Scientific Reports, 8
  • [4] 3D Printed Microfluidic Probes
    Brimmo, Ayoola
    Goyette, Pierre-Alexandre
    Alnemari, Roaa
    Gervais, Thomas
    Qasaimeh, Mohammad A.
    [J]. SCIENTIFIC REPORTS, 2018, 8
  • [5] A biocompatible 3D printed microfluidic C. elegans analysis device
    Burchard, Taylor
    Putzke, Aaron
    Measor, Philip
    [J]. MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS XX, 2022, 11955
  • [6] Design and Performance of a Microfluidic Particle Sorting Device
    Yang, Jun
    Yang, Jing
    You, Qinghe
    Hu, Ning
    Li, Yong
    Chen, Jie
    Li, Tingyu
    Xu, Jing
    Cao, Yi
    [J]. ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 668 - +
  • [7] Effective Cell and Particle Sorting and Separation in Screen-Printed Continuous-Flow Microfluidic Devices with 3D Sidewall Electrodes
    Lin, Xiaoguang
    Yao, Jie
    Dong, Hua
    Cao, Xiaodong
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2016, 55 (51) : 13085 - 13093
  • [8] 3D Printed Multimaterial Microfluidic Valve
    Keating, Steven J.
    Gariboldi, Maria Isabella
    Patrick, William G.
    Sharma, Sunanda
    Kong, David S.
    Oxman, Neri
    [J]. PLOS ONE, 2016, 11 (08):
  • [9] Inkjet 3D Printed Microfluidic Devices
    Adamski, Krzysztof
    Kubicki, Wojciech
    Walczak, Rafal
    [J]. PROCEEDINGS OF THE 23RD INTERNATIONAL CONFERENCE ON MIXED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS (MIXDES 2016), 2016, : 504 - 506
  • [10] Modular micropumps fabricated by 3D printed technologies for polymeric microfluidic device applications
    Alvarez-Brana, Y.
    Etxebarria-Elezgarai, J.
    de Larrinaga-Vicente, L. Ruiz
    Benito-Lopez, F.
    Basabe-Desmonts, L.
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 2021, 342
12345