Oxygen Species Involved in Complete Oxidation of CH4 by SrFeO3-δ in Chemical Looping Reforming of Methane

Compared with conventional methane reforming technologies, chemical looping reforming (CLR) has the advantages of self-elimination of coke, a suitable syngas ratio for certain down-stream processes, and a pure H-2 or CO stream. In the reduction step of CLR, methane combustion has to be inhibited, which could be achieved by designing appropriate oxygen carriers and/or optimizing the operating conditions. To gain a further understanding of the combustion reaction, methane oxidation by perovskite (SrFeO3-delta) at 900 degrees C and 1 atm in a pulse mode was investigated in this work. The oxygen non-stoichiometry of SrFeO3-delta prepared by a Pechini-type polymerizable complex method is 0.14 at ambient conditions, and it increases to 0.25 and subsequently to 0.5 when heating from 100 to 900 degrees C in argon that contains 2 ppmv of molecular oxygen. The activation energies of the first and second transitions are 294 and 177 kJ/mol, respectively. The presence of 0.99 vol.% hydrogen in argon significantly reduces the amount CO2 produced. At a pulse interval of 10 min, the amount of CO2 produced in the absence of hydrogen is one order of magnitude greater than that in the presence of hydrogen. In the former case, the amount of CO2 produced dramatically decreases first and then gradually approaches a constant, and the oxygen species involved in methane combustion can be partially replenished by extending the pulse interval, e.g., 82.5% of this type of oxygen species is replenished when the pulse interval is extended to 60 min. The restored species predominantly originate from those that reside in the surface layer or even in the bulk.