Effect of Acidic Media on Surface Topography and Color Stability of Two Different Glass Ceramics

被引:0
|
作者
Makkeyah, Fatma [1 ]
Elsahn, Nesrine A. [2 ,3 ,4 ]
Bakr, Mahmoud M. [5 ]
Al Ankily, Mahmoud [6 ]
机构
[1] British Univ Egypt, Fac Dent, Fixed Prosthodont Dept, Cairo, Egypt
[2] Ajman Univ, Coll Dent, Dept Clin Sci, Ajman, U Arab Emirates
[3] Ajman Univ, Ctr Med & Bioallied Hlth Sci Res, Ajman, U Arab Emirates
[4] Cairo Univ, Fac Dent, Dept Operat Dent, Cairo, Egypt
[5] Griffith Univ, Sch Med & Dent, Gen Dent Practice, Gold Coast, Qld, Australia
[6] British Univ Egypt, Fac Dent, Oral Biol Dept, POB 43, Cairo 11837, Egypt
关键词
acidic media; glass ceramics; surface roughness; color stability; CHEMICAL DURABILITY; ROUGHNESS; BEHAVIOR;
D O I
10.1055/s-0044-1786842
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Objective The aim of this study was to determine the effect of two acidic beverages (orange juice and H3PO4 -containing fizzy drink) on the surface topography and color stability of two commonly used computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials. Materials and Methods Sixty samples of two CAD/CAM ceramic materials, lithium disilicate (IPS e-max CAD) and zirconia reinforced lithium silicate (Vita Suprinity), were prepared according to the manufacturer's instructions. The samples were immersed in one of three media (artificial saliva, orange juice and H3PO4 -containing fizzy drink) and then stored in an incubator at 37 degrees C for 24 hours). Before and after immersion in different media, the surface roughness (Ra) of the samples was assessed using profilometer (JITAI8101 Surface Roughness Tester-Beijing Jitai Tech Detection Device Co. Ltd, China) and the color parameters were measured using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). Surface topography was observed using scanning electron microscope (SEM) and surface mineral content was compared before and after immersion. Paired sample t -test was used to determine the change in Ra before and after immersion. Two-way analysis of variance was used to determine the effect of different CAD/CAM materials and immersion media on the mean triangle Ra and mean triangle E of the studied groups. Tukey's honest significant difference posthoc test was used for multiple comparisons at a level of significance (alpha = 0.05). Results A significant increase in Ra and a decrease in the color stability of the two investigated ceramic materials were detected after immersion in the acidic media than in artificial saliva. SEM and energy-dispersive X-ray results revealed the dissolution of the glassy matrix and the exposure of silicate crystals. Conclusion The surface topography and color stability of glass ceramics are affected by the pH of different acidic media.
引用
收藏
页数:7
相关论文
共 50 条
  • [1] The Effect of Coloring Beverages on Color Stability of Hybrid Ceramics with Different Surface Treatments
    Jalali, Hamid
    Mostafavi, Azam Sadat
    Balaghi, Fatemeh
    PESQUISA BRASILEIRA EM ODONTOPEDIATRIA E CLINICA INTEGRADA, 2022, 22
  • [2] Characterisation of the surface structure and bioactivity of glass and glass ceramics using surface topography
    Lutisanova, Gabriela
    Palou, Martin T.
    Mikula, Milan
    Kozankova, Jana
    CENTRAL EUROPEAN JOURNAL OF CHEMISTRY, 2012, 10 (06): : 1890 - 1898
  • [3] Effect of surface coating on color stability of glass ionomers.
    AlBarkhill, AR
    Yaman, P
    Dennison, JB
    Razzoog, M
    JOURNAL OF DENTAL RESEARCH, 1996, 75 : 2900 - 2900
  • [4] COLOR STABILITY OF A NANOFILL COMPOSITE: EFFECT OF DIFFERENT IMMERSION MEDIA
    Fontes, Silvia Terra
    Fernandez, Maria Raquel
    de Moura, Claudia Modena
    Meireles, Sonia Saeger
    JOURNAL OF APPLIED ORAL SCIENCE, 2009, 17 (05) : 388 - 391
  • [5] Effect of Surface Glaze Treatment and Mechanical Polishing on the Color Stability of Two Types of Cad/Cam Ceramics
    Sadaf Ghazaee
    Elnaz Moslehifard
    Tahereh Ghaffari
    Farzad Nasirpouri
    Glass and Ceramics, 2024, 80 : 396 - 401
  • [6] Effect of Surface Glaze Treatment and Mechanical Polishing on the Color Stability of Two Types of Cad/Cam Ceramics
    Ghazaee, Sadaf
    Moslehifard, Elnaz
    Ghaffari, Tahereh
    Nasirpouri, Farzad
    GLASS AND CERAMICS, 2024, 80 (9-10) : 396 - 401
  • [7] Color Stability of CAD/CAM Ceramics Prepared with Different Surface Finishing Procedures
    Kanat-Erturk, Burcu
    JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY, 2020, 29 (02): : 166 - 172
  • [8] Color stability of two different resin matrix ceramics: randomized clinical trial
    Aliaa Ibrahim Mahrous
    Aya A. Salama
    Alshaimaa Ahmed Shabaan
    Ahmed Abdou
    Mohamed Mostafa Radwan
    BMC Oral Health, 23
  • [9] Color stability of two different resin matrix ceramics: randomized clinical trial
    Mahrous, Aliaa Ibrahim
    Salama, Aya A.
    Shabaan, Alshaimaa Ahmed
    Abdou, Ahmed
    Radwan, Mohamed Mostafa
    BMC ORAL HEALTH, 2023, 23 (01)
  • [10] Effect of cigarette smoking on the color stability and surface roughness of two different denture base materials
    Smew, Ahlam Abdalla Mohamed
    Yildirim, Gulhan
    Guven, Melahat Celik
    AMERICAN JOURNAL OF DENTISTRY, 2022, 35 (01): : 25 - 29