Oil Removal Technology for Water Injection in Low-Permeability Reservoirs: A Micro-Vortex Flow Approach

Gravity settling is a widely employed technology that removes oil from produced water in oilfields. However, with the transition of reservoir development to low-permeability reservoirs, conventional produced water settling tanks face limitations in the treatment efficiency and coagulant dosage. This study presents an innovative approach that optimizes sedimentation tank structures and integrates micro-vortex flow technology to enhance coagulation and flocculation. Through chemical dosage experiments, comparative experiments, and long-term observation, the micro-vortex flow reactor demonstrates a 9.4% increase in oil removal efficiency while reducing the coagulant dosage by 30.0%. The MOR equipment achieved a 20.5% higher oil removal efficiency than conventional methods while maintaining effluent oil and suspended solids below 20 mg/L. The long-term observation experiment of MOR equipment further highlights oil removal efficiency of 94.2% and the micro-vortex reactor's excellent anti-pollution performance. The MOR equipment significantly reduces the land occupancy area by over 50% compared to conventional methods, thanks to the implementation of micro-vortex flow technology that effectively addresses the limitations associated with traditional settling tanks. This study contributes to advancing efficient and sustainable practices in waterflooding reservoirs, particularly for meeting stringent standards of water injection in low-permeability oilfields.