共 50 条
Accurate Prediction of Reverse Solute Flux in Forward Osmosis Systems Using Comparative Machine Learning Models
被引:2
|作者:
Boubakri, Ali
[1
]
Elgharbi, Sarra
[2
]
Bouguecha, Salah
[3
]
Bechambi, Olfa
[4
]
Bilel, Hallouma
[5
]
Alanazy, Haessah D.
[2
]
Hafiane, Amor
[1
]
机构:
[1] Ctr Water Res & Technol, Lab Water Membranes & Environm Biotechnol, Technopk Borj Cedria, Tunis, Tunisia
[2] Univ Hail, Coll Sci, Chem Dept, Hail, Saudi Arabia
[3] King Abdulaziz Univ, Fac Engn, Dept Mech Engn, PB 80204, Jeddah 21589, Saudi Arabia
[4] Univ Hail, Hail, Saudi Arabia
[5] Jouf Univ, Coll Sci, Dept Chem, Sakaka 72341, Saudi Arabia
关键词:
Forward osmosis;
Reverse solute flux;
Machine learning;
ANN;
MLR;
ANFIS;
DRAW SOLUTE;
MEMBRANE;
FEED;
DESALINATION;
TEMPERATURE;
PERMEATION;
REJECTION;
REMOVAL;
D O I:
10.1007/s13369-024-09267-0
中图分类号:
O [数理科学和化学];
P [天文学、地球科学];
Q [生物科学];
N [自然科学总论];
学科分类号:
07 ;
0710 ;
09 ;
摘要:
Forward osmosis (FO) is a promising technology that can help to recover freshwater from saline and wastewater streams. However, it faces challenges such as reverse solute flux (RSF). RSF is the movement of salts from the draw solution to the feed solution, which can have several negative impacts on FO performance. This paper focuses into the development of machine learning techniques, including MLR, ANN, and ANFIS, to predict RSF in the FO system. Two commercially available membranes (CTA and TFC) were used to avoid the influence of synthesized membranes. The models were evaluated using experimental data obtained from previous lab-scale experiments. The results showed that the ANFIS and ANN models were both accurate, with R2 values of 96% and 97.6%, respectively. The ANFIS model performed slightly better than ANN model, while the MLR model displayed inaccurate predictions, with a lower R2 (43.46%) and MSE (2.61 x 10-2) and higher AARE (2.221). The study also identified the most impactful parameters on RSF, such as the DS type, FS concentration, and FS temperature. The study concludes that machine learning techniques can be successfully applied to model RSF in FO systems with high accuracy and recommends their use in the industry to improve the performance of membrane-based systems.
引用
收藏
页数:15
相关论文