CFD Research on Natural Gas Sampling in a Horizontal Pipeline

Accurately determining if the sample parameters from a natural gas pipeline's sampling system reflect the fluid characteristics of the main pipe has been a significant industry concern for many years. In this paper, samples of natural gas in a horizontal pipeline are investigated. CFD is used in this work and the turbulence is considered in the simulation. Firstly, the critical diameter for particles affected by gravity within such pipeline is determined. And then, the effects of the operation pressure and velocity of sampling branches on sample parameters, and the influence of particle density on these sample parameters, are analyzed. Finally, four different structures of sample branches for natural gas in a horizontal pipeline are compared. It is found that 100 mu m is the critical diameter at which particles are affected by gravity; the operating pressure of the sampling branch has a significant impact on the particle mass concentration. The particle density has little impact on the sampling system. Overall, the design of the sampling branches does not cause significant sampling errors. This study provides guidance for optimal sampling in existing natural gas pipelines and enables effective monitoring of particle impurity content and properties in natural gas.