RC-Oscillator-Based Battery-Less Wireless Sensing System Using RF Resonant Electromagnetic Coupling

A wireless sensor terminal module of 5cc size (2.5 cm x 2.5 cm x 0.8 cm) that does not require a battery is proposed by integrating three kinds of circuit technologies. (i) a low -power sensor interface: an FM modulation type CMOS sensor interface circuit that can operate with a typical power consumption of 24.5 mu W was fabricated by the 0.7- mu m CMOS process technology. (ii) power supply to the sensor interface circuit: a wireless power transmission characteristic to a small -sized PCB spiral coil antenna was clarified and applied to the module. (iii) wireless sensing from the module: backscatter communication technology that modulates the signal from the base terminal equipment with sensor information and reflects it, which is used for the low -power sensing operation. The module fabricated includes a rectifier circuit with the PCB spiral coil antenna that receives wireless power transmitted from base terminal equipment by electromagnetic resonance coupling and converts it into DC power and a sensor interface circuit that operates using the power. The interface circuit modulates the received signal with the sensor information and reflects it back to the base terminal. The module could achieve 100 mm communication distance when 0.4 mW power is feeding to the sensor terminal.