A comparative study of the mechanical and thermal properties of EPDM rubber/cement kiln dust composite cured by ionizing radiation

被引：1
|
作者：
Khozemy, Ehab E. [1 ]
Nasef, Shaimaa M. [1 ]
Radi, H. [2 ]
机构：
[1] Egyptian Atom Energy Author, Natl Ctr Radiat Res & Technol, Radiat Res Polymer Chem Dept, Cairo, Egypt
[2] Egyptian Atom Energy Author, Natl Ctr Radiat Res & Technol, Radiat Chem Dept, Cairo, Egypt
来源：
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION | 2024年 / 29卷 / 05期
关键词：
EPDM rubber; cement kiln dust; composite; gamma radiation; FLY-ASH PARTICLES; PRECIPITATED SILICA; CHEMICAL-PROPERTIES; NATURAL-RUBBER; ELASTOMERS; FILLERS;
D O I：
10.1080/1023666X.2024.2360855
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
In this work, cement kiln dust (CKD) will be studied as an unconventional filler for ethylene-propylene-diene terpolymer (EPDM) rubber as an alternative to silica, which is widely used as filler for many types of rubber. (EPDM)/CKD rubber composites were fabricated using ionizing radiation. EPDM rubber was blended with different portions of cement-kiln dust 5, 10, 15, 20, 25, and 30 phr (phr = parts per hundred rubber). The prepared composites were cured by exposing to different doses of gamma rays up to 150 kGy to enhance the crosslinking of the EPDM rubber. The thermo-mechanical properties of the EPDM/CKD and EPDM/Si composites were investigated as a function of irradiation dose. The results showed a significant improvement in elongation and tensile strength by incorporating cement dust into EPDM rubber up to 20 phr, which is not significantly different from composites incorporated with silica. Gamma irradiation significantly improved the properties of all formulations.
引用
收藏
页码：282 / 299
页数：18
相关论文
共 50 条
  • [1] Hydration and Mechanical Properties of Cement Kiln Dust-Blended Cement Composite
    Lee, Woo-Seok
    Choi, Young-Cheol
    MATERIALS, 2024, 17 (19)
  • [2] Comparative study on mechanical, thermal, viscoelastic and rheological properties of vulcanised EPDM rubber
    Cavdar, S.
    Ozdemir, T.
    Usanmaz, A.
    PLASTICS RUBBER AND COMPOSITES, 2010, 39 (06) : 277 - 282
  • [3] Study of the effect of cement kiln dust on the mechanical, thermal and durability properties of compressed earth blocks
    Mebarkia, Rahma
    Bouzeroura, Mansour
    Chelouah, Nasser
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 349
  • [4] A Study on Mechanical and Thermal Properties of Silicone Rubber/EPDM Damping Materials
    Zhang, Chen
    Pal, Kaushik
    Byeon, Jong-Ung
    Han, Sang-Min
    Kim, Jin Kuk
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 119 (05) : 2737 - 2741
  • [5] Factors Analysis of Mechanical Properties on AT/EPDM Rubber Composite
    Guo, Hao
    Tang, Qingguo
    Liang, Jinsheng
    Ding, Yan
    Wang, Lijuan
    Du, Yulong
    ADVANCE IN ECOLOGICAL ENVIRONMENT FUNCTIONAL MATERIALS AND ION INDUSTRY III, 2012, 427 : 51 - +
  • [6] Influence of cement kiln dust substitution on the mechanical properties of concrete
    Shoaib, MM
    Balaha, MM
    Abdel-Rahman, AG
    CEMENT AND CONCRETE RESEARCH, 2000, 30 (03) : 371 - 377
  • [7] Effect of EPDM recyclate dust filler on the mechanical properties of rubber mixtures
    Pypec, Krzysztof
    Piesowicz, Elzbieta
    Paszkiewicz, Sandra
    Irska, Izabela
    PRZEMYSL CHEMICZNY, 2021, 100 (11): : 1071 - 1076
  • [8] Lignin as coupling agent in EPDM rubber: thermal and mechanical properties
    Ge Xu
    Guangyu Yan
    Jing Zhang
    Polymer Bulletin, 2015, 72 : 2389 - 2398
  • [9] Lignin as coupling agent in EPDM rubber: thermal and mechanical properties
    Xu, Ge
    Yan, Guangyu
    Zhang, Jing
    POLYMER BULLETIN, 2015, 72 (09) : 2389 - 2398
  • [10] Effects of composite alkaline activator on mechanical properties and hydration mechanism of cemented paste backfill with cement kiln dust
    Hu, Minhui
    Dong, Tianwen
    Cui, Zhenglong
    SCIENTIFIC REPORTS, 2024, 14 (01):
12345