Sequestration of an Azo Dye by a Potential Biosorbent: Characterization of Biosorbent, Adsorption Isotherm and Adsorption Kinetic Studies

This study explores the detailed characterization of a biosorbent (Hen Feather) and its efficient use in eradicating the azo dye Metanil Yellow (MY) from its aqueous solutions. Effects of a range of experimental parameters, including pH, initial dye concentration, biosorbent dosage and contact time on the adsorption, were studied. A detailed physical and chemical characterization of the biosorbent was made using SEM, XRD, XPS and FTIR. During the optimization of adsorption parameters, the highest dye uptake of almost 99% was recorded at pH 2, dye concentration 2 x 10-5 M, 0.05 g of biosorbent and a contact period of 75 min. Various adsorption isotherm models were studied to gather different adsorption and thermodynamic parameters. The linearity of the Langmuir, Freundlich and D-R adsorption isotherms indicate homogeneous, multilayer chemisorption with high adsorption affinity between the dye and biosorbent. Values of the changes in the Gibbs free energy (Delta G degrees) and the enthalpy (Delta H degrees) of the adsorption process have been calculated, these values indicate that it is a spontaneous and endothermic process. Kinetics of the adsorption were also measured, and it was established that the adsorption of MY over Hen Feather follows a pseudo-second-order kinetic model at temperatures 30, 40 and 50 degrees C. The findings of this investigation clearly indicate that the studied biosorbent exhibits a high affinity towards the dye (MY), and it can be effectively, economically and efficiently used to sequestrate and eradicate MY from its aqueous solutions.