Microstructural study on in-situ high-entropy (NbMoTaWV)C reinforced nanocrystalline NbMoTaWVC refractory high entropy alloys prepared by mechanically alloying

Refractory high-entropy alloys (RHEAs) can be commonly regarded as the best candidates for potentially substituting for the nickel-based superalloys practically used in the areas of aviation and nuclear industry, which can significantly endure in high-temperature and harsh environment. In this work, a nanocrystalline NbMoTaWVC RHEA is successfully produced by mechanical alloying method and X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and spherical aberration corrected transmission electron microscopy (AC-TEM) are employed to systematically characterized the microstructural details of NbMoTaWV and NbMoTaWVC RHEAs mechanically alloyed powders. Our results can support the evidence that the observable minimum nanoparticle sizes of the NbMoTaWV and NbMoTaWVC RHEAs considerably decrease to approximately similar to 100 nm. Furthermore, the average grain sizes are gradually refined and thus notably drop to around of 30-50 nm, and five elemental powders can be found to be homogeneously alloyed. The evidence can be confirmed that the order of solid solution may be proposed as follows: Nb -> Mo -> V -> Ta -> W. The chemical short-range order occurred at the local nanoscale of NbMoTaWV and NbMoTaWVC RHEAs. Meanwhile, further microstrutural analysis can demonstrate that NbMoTaWV and NbMoTaWVC RHEAs powders with ultrafined grain have a bcc phase structure and bcc + bct matrix phases combined with high-entropy tungsten carbides (NbMoTaWV)C and (NbMoTaWV)2C of nano-precipitated phases, respectively, suggesting that the martensitic transformation probably occurred. The NbMoTaWV and NbMoTaWVC RHEAs powders of locally crystal lattice distortion rates reached approximately 8.07% and 6.33%.