Li3N/SiO2 modified 3D collectors to extend the cycle life of lithium anode

Despite the many benefits of lithium-metal anodes in next-generation lithium-metal batteries, they are limited by their infinite volume expansion and lithium dendrite growth. In this study, we propose a novel method for producing stable lithium-metal anodes by first coating a Cu current collector with a thin insulating silica layer, then laser etching to create holes where lithium deposition can take place. Additionally, an artificial solid electrolyte interphase layer of Li3N, which is generated in situ on the deposited lithium metal surface can reduced electrolyte consumption and promote uniform lithium deposition, and the confined space within the holes prevent dendrite formation. The above design realizes the use of limited lithium and improves the utilization of lithium metal while increasing the safety of the cells. The 3D Cu supported Li anode exhibited stable average coulombic efficiency of 99.8 % for 300 cycles at a current density of 1 Ma cm -2. Specifically, full cells made of such a 3D Cu anode coupled with a LiFePO4 cathode exhibited a capacity of 125 mA h g-1 after 250 cycles (low N/P capacity ratio of 2.38), providing a dendrite -free lithium metal anode.