Rheological aspects of solid-to-liquid phase transitions in paraffin wax/ bitumen blends for thermal energy storage applications

This paper correlates the evolution of the rheological and thermal properties with microstructure during the phase change of a blend of bitumen with a selected paraffin wax, having a melting point centred around 60 degrees C, for the development of bituminous based membranes for thermal energy storage applications. For this purpose, temperature sweep tests within the linear viscoelastic range, stationary state flow curves, Differential Scanning Calorimetry (DSC), polarised optical microscopy observations and solar irradiation tests were performed. The reported rheological results clearly point out a gel -like behaviour for both paraffin and paraffin/bitumen blend that is preserved almost up to the end of the phase change interval. This is consequence of the development of a network of interconnected crystals of paraffin wax which progressively disappear as temperature increases. Interestingly, a weak gel structure is kept even at low crystallinity levels since only a few junctions among structures are necessary to build a spanning network. Finally, the large degree of crystallinity of paraffin wax retained in the bitumen/paraffin wax is behind its thermoregulation ability, as was corroborated by solar irradiation tests. Therefore, results indicated the great potential of these formulations for thermal energy storage and related applications.