The Electrical Resistivity of Liquid Fe-16wt%S-2wt%Si at High Pressures and the Effect of S and Si on the Dynamo in the Ancient Vestan Core

A critical component of predicting thermal convection and dynamo action in the cores of terrestrial planetary bodies is the adiabatic heat flux at the top of the core. Powders of Fe, FeS, and Fe-9wt%Si were mixed to imitate the core of Asteroid 4 Vesta, which studies of HED meteorites indicate is comprised of 13-16wt%S and 1-2wt%Si. In a 1000-ton cubic anvil press, the voltage drop across an Fe-16wt%S-2wt%Si sample of 8-10 mm3 was measured at 2, 3, 4, and 5 GPa and similar to 300-2000 K. The resistivity of Fe-16wt%S-2wt%Si is 400 +/- 50 mu Omega center dot cm for 2-5 GPa for the complete liquid state. Using the Wiedemann-Franz Law, this gives an electronic thermal conductivity of 11 +/- 1.5 W/m/K for 2-4 GPa at complete melting and an adiabatic heat flow of 55 +/- 15 MW at the top of an early Fe-16wt%S-2wt%Si Vestan core. The 2 GPa boundary of the miscibility of Fe-16wt%S-2wt%Si is observed. The adiabatic heat flow through an Fe-16wt%S-2wt%Si core of variable size is discussed, as well as the resistivity of liquid Fe alloy at small planetary core conditions as a function of S and Si alloying composition. On the basis of previous studies on binary and ternary alloys of Fe with S and/or Si, we interpolate the separate effects of S and Si on the resistivity (and inversely on thermal conductivity and core adiabatic heat flow).