Design and testing of an irradiation room with low room-scattering for neutron calibration

Introduction: This laboratory plans to establish neutron reference radiation fields with three neutron sources to calibrate neutron-measuring devices. To perform calibration at multiple dose rates, neutron ambient dose equivalent rate (center dot) H & lowast; (10 ) needs to range 1 mu Sv/h to 10 mSv/h. The lower limit requires that the maximum available calibration distance should be at least 4.5 m. Methods: To reduce room-scattered neutrons and extend the available calibration distance, MC simulations were conducted to determine the material and size of the irradiation room. A 3 '' Bonner sphere and a LB6411 environmental neutron dosimeter were used to characterize the irradiation room. Results: A 14.32 x 14.32 x 12.00 m 3 irradiation room was built based on simulation results. Floor, roof, and walls are made of 75 cm concrete covered by a coating layer of 2 cm BPE and 3 cm PE. Experimental maximum available calibration distance reaches 4.65 m. The range of (center dot) H & lowast; (10 ) for calibration covers 1 mu Sv/h to 10 mSv/h. Neutron and photon (center dot) H & lowast; (10 ) outside the room are within 0.19 mu Sv/h and 0.22 mu Sv/h, respectively.