Exploring novel nanostructural architecture of doubly doped ceria (Ce0.85Sr0.075Sm0.075O2-δ) and barium cerate (BaCeO3) as electrolytes for low-temperature solid oxide fuel cells

被引:0
|
作者
Bhongale, Kuldip [1 ]
Acharya, Smita [1 ]
Shirbhate, Shraddha [2 ]
Joshi, Shraddha [3 ]
Kulkarni, Shilpa [3 ]
机构
[1] RTM Nagpur Univ, Dept Phys, Adv Mat Res Lab, Nagpur 440033, MS, India
[2] Inst Chem Technol, Dept Phys, Mumbai, India
[3] Ramdeobaba Univ, Nagpur, MS, India
关键词
Co-doped ceria-perovskite system composite; Novel nanostructural design; LT-SOFCs; NANOCOMPOSITE ELECTROLYTE; CARBONATE COMPOSITE; IONIC-CONDUCTIVITY; CONDUCTORS; HETEROSTRUCTURE; INTERFACES; SOFCS;
D O I
10.1016/j.ijhydene.2024.09.226
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This study presents the development of a composite electrolyte for use in low-temperature (300-500 degrees C) Solid oxide Fuel Cells, focusing on a novel nanostructural design. The electrolyte comprises co-doped ceria (Ce0.85Sr0.075Sm0.075O2-delta, DCO) and barium cerate (BaCeO3, BCO), integrated into a unique nanostructural architecture. Initially, the constituent phases of the composite DCO and BCO are synthesized using a soft-chemical route separately, followed by their integration through liquid mixing technique in various compositions (90:10, 80:20, 70:30, 60:40, 50:50) of DCO:BCO in weight ratio. The composite structure is confirmed by X-ray diffraction, and refined the structural data by Rietveld refinement indicating a structural agreement with cubic and fluorite phases of DCO and BCO, respectively. Scanning Electron microscopy (SEM) and Energy Dispersive X-ray Analysis (EDAX) reveal a uniform distribution of two phases with fine size distribution below 50 nm. Transmission Electron microscopy (TEM) images illustrate the core-shell-like integration of the two phases. High-resolution TEM images indicate that the core consists of the DCO phase, while the shell is composed of the BCO phase. The microstructure of sintered pellets exhibits gas-tight densification, with grains dominated by the DCO phase and BCO phase dispersed along grain boundaries. The ionic conductivity of composite systems is extracted from Electrochemical impedance spectroscopy (EIS) studies, showing that DCO-BCO-40 exhibits the highest conductivity 1.132 x 10(-3) Scm(-1) @400 degrees C, which is higher than pristine DCO (0.34 x 10(-4) Scm(-1) @400 degrees C). Single cells fabricated using DCO-BCO-40 electrolytes deliver a power output of 280 mW cm(-2) whereas pristine DCO showed 279 mW @500 degrees C. This study exhibits the potential of the core-shell-like nanostructural architecture of electrolytes in advancing Low-temperature solid oxide Fuel cell (LT-SOFC) technology and facilitating the transition toward sustainable energy systems.
引用
收藏
页码:1186 / 1195
页数:10
相关论文
共 50 条
  • [1] Evaluation of La0.6Sr0.4CoO3-δ-Ce0.85Sm0.075Nd0.075O2-δ composite cathodes for intermediate temperature solid oxide fuel cells
    Huang, Zhangfa
    Liu, Zhijun
    Hu, Hua
    Wang, Jianxin
    Chen, Ming
    Cao, Baohua
    Wang, Qin
    Yang, Jun
    Guan, Wanbing
    Liang, Tongxiang
    CERAMICS INTERNATIONAL, 2022, 48 (11) : 16319 - 16325
  • [2] Solid oxide fuel cells using Sm0.075Nd0.075Ce0.85O2-δ electrolyte coupled with an electron-blocking interlayer
    Lv, Huanlin
    Gong, Zheng
    Xia, Yunpeng
    Jin, Zongzi
    Wang, Di
    Liu, Wei
    CERAMICS INTERNATIONAL, 2020, 46 (08) : 10379 - 10384
  • [3] Performance evaluation of Ca3Co4O9-δ cathode on Sm0.075Nd0.075Ce0.85O2-δ electrolyte for solid oxide fuel cells
    Zhu, Xiulong
    Lusi, A.
    Zhu, Chengjun
    Wang, Yanjiao
    Jin, Jing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 694 : 877 - 883
  • [4] Different ceria-based materials Gd0.1Ce0.9O2-δ and Sm0.075Nd0.075Ce0.8O2-δ for ceria-bismuth bilayer electrolyte high performance low temperature solid oxide fuel cells
    Hou, Jie
    Liu, Fengguang
    Gong, Zheng
    Wu, Yusen
    Liu, Wei
    JOURNAL OF POWER SOURCES, 2015, 299 : 32 - 39
  • [5] Preparation and characterization of Ce0.85La0.15 − xSrxO{2 − (0.075 + x / 2)} solid electrolytes for intermediate temperature solid oxide fuel cells
    Nandini Jaiswal
    Devendra Kumar
    Shail Upadhyay
    Om Parkash
    Ionics, 2015, 21 : 497 - 505
  • [6] Nano grained Sr and Zr co-doped BaCeO3 electrolytes for intermediate temperature solid oxide fuel cells
    Mumtaz, Saleem
    Ahmad, M. Ashfaq
    Raza, Rizwan
    Arshad, M. Sarfraz
    Ahmed, Bashir
    Ashiq, M. Naeem
    Abbas, Ghazanfar
    CERAMICS INTERNATIONAL, 2017, 43 (16) : 14354 - 14360
  • [7] Ce0.8Sm0.2O1.9 decorated with electron-blocking acceptor-doped BaCeO3 as electrolyte for low-temperature solid oxide fuel cells
    Gong, Zheng
    Sun, Wenping
    Cao, Jiafeng
    Shan, Duo
    Wu, Yusen
    Liu, Wei
    ELECTROCHIMICA ACTA, 2017, 228 : 226 - 232
  • [8] Preparation and characterization of Ce0.85La0.15-xSrxO{2-(0.075+x/2)} solid electrolytes for intermediate temperature solid oxide fuel cells
    Jaiswal, Nandini
    Kumar, Devendra
    Upadhyay, Shail
    Parkash, Om
    IONICS, 2015, 21 (02) : 497 - 505
  • [9] Properties of Ce0.85Sm0.15O2-δ-CuO electrolytes for intermediate-temperature solid oxide fuel cells
    Tian, Ning
    Qu, Yanmei
    Men, Haijiao
    Yu, Ji
    Wang, Xiaoyan
    Zheng, Jie
    SOLID STATE IONICS, 2020, 351
  • [10] Enhanced sinterability and electrical performance of Sm2O3 doped CeO2/BaCeO3 electrolytes for intermediate-temperature solid oxide fuel cells through Bi2O3 co-doping
    Sun, Haibin
    Guo, Xue
    Yu, Fangyong
    Yang, Zanzhong
    Li, Guochang
    Li, Jiao
    Ding, Hao
    Meng, Fanpeng
    Fan, Zhenkun
    Wang, Peng
    Yan, Weilu
    Hu, Zhiqiang
    CERAMICS INTERNATIONAL, 2019, 45 (06) : 7667 - 7672