Prediction of Temperatures and Residual Stresses During FSW of AA2024 and AA7075 with Copper Using Hyperweld Software

被引：0

作者：

Mouria, Pradeep Kumar ^{[1
,2
]}

Singari, Ranganath M. ^{[2
]}

Wattal, Reeta ^{[2
]}

机构：

[1] Manav Rachna Univ, Dept Mech Engn, Faridabad, Haryana, India

[2] Delhi Technol Univ, Dept Mech Engn, Delhi, India

来源：

JOURNAL OF POLYMER & COMPOSITES | 2023年 / 11卷

关键词：

FSW; Peak temperature; AA7050; AA2024; copper; hyper weld; FRICTION; BEHAVIOR; JOINT;

D O I：

暂无

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

This paper investigates the temperature at different workpiece and tool pin sections. In this investigation, various materials are utilized, for example, AA7050, AA2024, and Copper, for other process parameters. Tool rotational speed, tool tilt angle, and welding speed are process parameters. Thermal distribution results are examined with the assistance of these process parameters. Altair's Hyper Weld, a preeminent computer -aided engineering (CAE) application for the simulation of friction stir welding, has been used for detailed investigations. The outcomes are introduced for divergence in the top temperature of these distinctive aluminum and copper compound plates at similar information parameters during the Friction Stir Welding (FSW) process. It is observed that more heat is generated when the copper plate is placed on the right side, and the aluminum plate is placed on the left side.

引用

页码：S101 / S112

页数：12

共 50 条

[1] Prediction of Temperatures and Residual Stresses During FSW of AA2024 and AA7075 with Copper Using Hyperweld Software
Mouria, Pradeep Kumar
Singari, Ranganath M.
Wattal, Reeta
JOURNAL OF POLYMER & COMPOSITES, 2023, 11 : S101 - S112
[2] The effect of inhibitor structure on the corrosion of AA2024 and AA7075
Harvey, T. G.
Hardin, S. G.
Hughes, A. E.
Muster, T. H.
White, P. A.
Markley, T. A.
Corrigan, P. A.
Mardel, J.
Garcia, S. J.
Mol, J. M. C.
Glenn, A. M.
CORROSION SCIENCE, 2011, 53 (06) : 2184 - 2190
[3] FSSW process parameter optimization for AA2024 and AA7075 alloy
Anton Savio Lewise, K.
Edwin Raja Dhas, J.
MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (01) : 34 - 42
[4] Friction stir welding of dissimilar AA2024 and AA7075 aluminum alloys
Khodir, Saad Ahmed
Shibayanagi, Toshiya
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2008, 148 (1-3): : 82 - 87
[5] Development and analysis of frits for enamelling AA2024, AA6082 and AA7075 aluminium alloys
Bukovec, Mitja
Xhanari, Klodian
Finšgar, Matjaž
Materials and Corrosion, 2021, 72 (04) : 660 - 671
[6] Study the Microstructural Joints of AA2024 and AA7075 Alloy by Friction Stir Welding
George, Britto Joseph
Valarmathi, T. N.
Arvindh, S.
Kumar, L. Bharath
Jeevahan, Jeya
Mageshwaran, G.
3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020), 2020, 2311
[7] Development and analysis of frits for enamelling AA2024, AA6082 and AA7075 aluminium alloys
Bukovec, Mitja
Xhanari, Klodian
Finsgar, Matjaz
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2021, 72 (04): : 660 - 671
[8] Dissimilar FSW of AA2024 and AA7075: effect of materials positioning and tool deviation value on microstructure, global and local mechanical behavior
Hadji, Idir
Badji, Riad
Gaceb, Mohamed
Cheniti, Billel
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118 (7-8): : 2391 - 2403
[9] Dissimilar FSW of AA2024 and AA7075: effect of materials positioning and tool deviation value on microstructure, global and local mechanical behavior
Idir Hadji
Riad Badji
Mohamed Gaceb
Billel Cheniti
The International Journal of Advanced Manufacturing Technology, 2022, 118 : 2391 - 2403
[10] COMPARATIVE FAILURE OF AERONAUTICAL ALLOYS AA2024 AND AA7075 AT LOW AND HIGH STRAIN RATE
Gunasilan, Manar
Longere, Patrice
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 1523 - 1530

← 1 2 3 4 5 →