Analysis and control of hydraulic support stability in fully-mechanized longwall face to the dip with great mining height

被引:0
|
作者
华心祝 [1 ]
王家臣 [2 ]
机构
[1] The MOE Key Laboratory of Coaimine Safety and High Efficiency Mining,Anhui University of Science and Technology,Huainan ,China
[2] School of Resource and Safety Engineering,China University of Mining and Technology (Beijing),Beijing
关键词
D O I
暂无
中图分类号
学科分类号
摘要
<正> The working condition of the hydraulic support in working face can be divided into three kinds of situations in the following: roof fall and collapse with cavity,advancing support and supporting.Took single support with four-pole in longwall face to the dip as research object,control method was studied to avoid support instability in three situations mentioned above.Based on these researches,the major factors of influencing on support stability and its controlling measures were put forward.According to specific conditions of working face 1215(3),which is fully-mechanized and Iongwall face to the dip with great mining height in Zhangji Coal Mine,Huainan Mining Group,the effective measures was taken to control supports stability.
引用
收藏
页数:4
相关论文
共 50 条
  • [1] Analysis and control of hydraulic support stability in fully-mechanized longwall face to the dip with great mining height
    华心祝
    王家臣
    [J]. International Journal of Coal Science & Technology, 2008, (03) : 399 - 402
  • [2] Mechanical relation between support stiffness and longwall face stability within fully-mechanized mining faces
    Wang, Zhaohui
    Wang, Jiachen
    Yang, Yi
    Tang, Yuesong
    Wang, Liang
    [J]. Zhongguo Kuangye Daxue Xuebao/Journal of China University of Mining and Technology, 2019, 48 (02): : 258 - 267
  • [3] Research on Hydraulic Support Selection of Unmanned Fully-mechanized Coal Mining Face
    Yang, Yongsheng
    Li, Xuewen
    Zhang, Lizhi
    [J]. PROCEEDINGS OF THE 2016 7TH INTERNATIONAL CONFERENCE ON MECHATRONICS, CONTROL AND MATERIALS (ICMCM 2016), 2016, 104 : 295 - 301
  • [4] Hydraulic support instability mechanism and its control in a fully-mechanized steep coal seam working face with large mining height
    Yuan, Y.
    Tu, S. H.
    Wang, F. T.
    Zhang, X. G.
    Li, B.
    [J]. JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY, 2015, 115 (05) : 441 - 447
  • [5] Study on support of retractable channel in fully-mechanized mining face with super large mining height
    Peng, Linjun
    Yue, Ning
    An, Liang
    Li, Shenlong
    Cai, Penghua
    Feng, Zhenhua
    Li, Minghui
    [J]. Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (06): : 204 - 210
  • [6] Development and chanllege of unmanned autonomous longwall fully-mechanized coal mining face
    Wang, Shibo
    Ge, Shirong
    Wang, Shijia
    Li, Zheng
    Wan, Zhijun
    [J]. Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (02): : 231 - 243
  • [7] Research on equipment intelligent control system in large mining height fully-mechanized face
    Feng, Yinhui
    Cui, Yao
    Wang, Xufeng
    Qin, Zeyu
    Wang, Zhiqiang
    Mao, Zixin
    [J]. Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (09): : 192 - 199
  • [8] Mechanism and control technique of the rib spalling in fully mechanized mining face with great mining height
    Ning, Yu
    [J]. Meitan Xuebao/Journal of the China Coal Society, 2009, 34 (01): : 50 - 52
  • [9] Study on mining pressure appearance feature in shallow-buried fully-mechanized longwall face
    Ren, Yan-Fang
    [J]. PROGRESS IN MINE SAFETY SCIENCE AND ENGINEERING II, 2014, : 993 - 996
  • [10] Influence of key strata cantilever structure motion on end-face fall in fully-mechanized face with super great mining height
    Ju, Jin-Feng
    Xu, Jia-Lin
    Zhu, Wei-Bing
    [J]. Meitan Xuebao/Journal of the China Coal Society, 2014, 39 (07): : 1197 - 1204