Hydrodynamic study of pumpjet propulsor with a ring at rotor tip and embedded in the groove of the inner wall of the duct

被引：0
|
作者：
Ye, Jing-Ming [1 ]
Sun, Da-Peng [1 ]
Wu, Yuan-Run [1 ]
Zhang, Xian-Feng [1 ]
机构：
[1] Department of Naval Architecture Engineering, Naval University of Engineering, Wuhan,430033, China
来源：
Chuan Bo Li Xue/Journal of Ship Mechanics | 2023年 / 27卷 / 03期
关键词：
Cavitation;
D O I：
10.3969/j.issn.1007-7294.2023.03.002
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：323 / 334
相关论文
共 10 条
  • [1] Parametric Study of the Hydrodynamic Characteristics of the Pumpjet Propulsor for the SUBOFF Submarine
    Kim, Jin-Wook
    Kim, Moon-Chan
    Park, Il-Ryong
    Seol, Hanshin
    Kim, Min-Jea
    Jin, Woo-Seok
    [J]. JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2023, 11 (10)
  • [2] Numerical Investigation of Different Tip Clearances Effect on the Hydrodynamic Performance of Pumpjet Propulsor
    Qin, Denghui
    Pan, Guang
    Huang, Qiaogao
    Zhang, Zhengdong
    Ke, Jiujiu
    [J]. INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS, 2018, 15 (05)
  • [3] Numerical simulation of hydrodynamic and cavitation performance of pumpjet propulsor with different tip clearances in oblique flow
    Qiu, Chengcheng
    Huang, Qiaogao
    Pan, Guang
    Shi, Yao
    Dong, Xinguo
    [J]. OCEAN ENGINEERING, 2020, 209
  • [4] Study on cavitation and pulsation characteristics of a novel rotor-radial groove hydrodynamic cavitation reactor
    Zhang, Deman
    Deng, Peng
    Hou, Ruijie
    Song, Yongxing
    Liu, Jingting
    Zhang, Weibin
    [J]. OPEN PHYSICS, 2024, 22 (01):
  • [5] Study on the wall-pressure fluctuation characteristics of a pump-jet propulsor duct in turbulent boundary layer
    Zhang, Junyue
    Zhang, Zhenhua
    Li, Huiyao
    Rao, Zhiqiang
    Hua, Hongxing
    [J]. OCEAN ENGINEERING, 2024, 293
  • [6] Attenuation of the Tip-Clearance Flow in a Pump-Jet Propulsor by Thickening and Raking the Tips of Rotor Blades: A Numerical Study
    Ji, Xue-Qin
    Dong, Xiao-Qian
    Yang, Chen-Jun
    [J]. APPLIED OCEAN RESEARCH, 2021, 113
  • [7] The study of the ionic wind blower with multi-needles/ring type electrodes disposed on inner wall of the cylindrical blower
    Jung, Jae-Seung
    Kim, Jin-Gyu
    [J]. JOURNAL OF ELECTROSTATICS, 2015, 78 : 55 - 59
  • [8] Study on mechanism of inner duct wall failure within fuel subassembly during core disruptive accidents in an LMFBR: Results of parametric analyses for heat transfer
    Toyooka, Jun-Ichi
    Endo, Hiroshi
    Tobita, Yoshiharu
    Takahashi, Minoru
    [J]. Transactions of the Atomic Energy Society of Japan, 2014, 13 (02) : 35 - 50
  • [9] Investigation of free fatty acid reduction from mixed crude palm oil using 3D-printed rotor-stator hydrodynamic cavitation: An experimental study of geometric characteristics of the inner hole
    Oo, Ye Min
    Somnuk, Krit
    [J]. ULTRASONICS SONOCHEMISTRY, 2023, 98
  • [10] A study on mechanism of early failure of inner duct wall within fuel subassembly with high heat flux from molten core materials based on analysis of an eagle experiment simulating core disruptive accidents in an LMFBR
    Toyooka, Jun-Ichi
    Endo, Hiroshi
    Tobita, Yoshiharu
    Ninokata, Hisashi
    [J]. Transactions of the Atomic Energy Society of Japan, 2013, 12 (01) : 50 - 66
1