Improvement of micro-perforated panel absorbers sound performance using resistive screens and sensitivity analysis of the composite absorber models

The sound attenuation performance of a composite absorber constituted by a micro-perforated panel, a resistive screen that is inserted into the air cavity and a rigid back plate, is studied. Using a nonlinear acoustic impedance model, the surface impedance of the absorber is determined by transfer matrix method, and the models are validated by comparison with experimental measurements performed at different sound pressure levels up to 150 dB. The contribution of the resistive screens in improving the acoustic performances of micro-perforated panel absorbers is presented. It is shown that the resistive screen increases the resistance of the absorber resulting in broadening of the absorption frequency band and improvement of the absorption coefficient when an appropriate perforation ratio of the panel is used. Sensitivity analysis is performed at higher pressure excitations, and the dimensionless input parameters are the perforation ratio of the panel, the ratio of the perforation diameter by the thickness of the panel, the ratio of the cavity depth by the thickness, the orifice Mach number and the resistance per unit area of the screen. The analysis shows the impact of the input parameters on the normalized surface impedance and the sound absorption coefficient of the absorber. It is demonstrated that the resistance per unit area of the screen influences strongly the acoustic properties of the absorber in the linear regime, while the perforation ratio of the panel and the orifice Mach number are the dominant parameters which control the acoustic behavior of the absorber in the nonlinear regime. (c) 2023 Institute of Noise Control Engineering.