Recent progress of graphitic phase carbon nitride photocatalytic materials on solar energy conversion

被引：0
|
作者：
Zhao M.-D. [1 ]
Li Y.-L. [1 ]
Wang J.-S. [1 ]
机构：
[1] Key Laboratory of Advanced Functional Materials, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing
来源：
Gongcheng Kexue Xuebao/Chinese Journal of Engineering | 2022年 / 44卷 / 04期
关键词：
Graphitic phase carbon nitride (g-C[!sub]3[!/sub]N[!sub]4[!/sub]); Heterojunction construction; Morphological control; Photocatalytic hydrogen evolution; Structural engineering;
D O I：
10.13374/j.issn2095-9389.2021.09.01.001
中图分类号：
学科分类号：
摘要：
With the increasing consumption of fossil fuels, severe energy shortages and environmental issues are fast approaching. Therefore, the development of green energy resources is urgently appealed. Among them, the sunlight-driven production of hydrogen fuel with suitable photocatalysts is regarded as one of the potential strategies to meet the sustainable energy demand in the future. However, photocatalysis still faces significant uncertainties mainly because of the notorious photogenerated electron-hole (e-h) recombination and low carriers' mobility. To achieve high photocatalytic performance, it is essential to tailor the spatial charge separation and fast charge transfervia electronic and structural manipulation of photocatalysts. As one of the hot-spot photocatalysts, graphitic phase carbon nitride (g-C3N4) has received tremendous attention in the study of solar-to-fuel (STF) conversion and carbon dioxide reduction reactions (CO2RR), owing to intrinsic merits, such as metal-free components, low-cost resources, good stability, and visible light response. Recently, considerable progress has been achieved to improve the photocatalytic STF efficiency of g-C3N4-based materials by developing strategies of structures and electric configurations engineering. In this study, different modification methods for g-C3N4 were systematically reviewed from the perspective of defects control to provide a new understanding of its structure-function relationship. Particularly, this study was composed in detail from three aspects to demonstrate the latest research progress of g-C3N4 photocatalytic materials. First, different routes toward g-C3N4 with different shapes were introduced, including 1D, 2D, and 3D. Second, doping effects and defect control on the separation and transfer of photogenerated electron-hole pairs were carefully reviewed. Finally, heterojunctions based on g-C3N4 were summarized, highlighting the Z-scheme heterojunction. In addition, some future directions and challenges for the enhancement of the photocatalytic efficiency upon g-C3N4 were pointed out according to our understanding of photocatalytic water splitting. Copyright ©2022 Chinese Journal of Engineering. All rights reserved.
引用
收藏
页码：641 / 653
页数：12
相关论文
共 98 条
  • [1] Ong W J, Tan L L, Ng Y H, Et al., Graphitic carbon nitride (g-C<sub>3</sub>N<sub>4</sub>)-based photocatalysts for artificial photosynthesis and environmental remediation: Are we a step closer to achieving sustainability?, Chem Rev, 116, 12, (2016)
  • [2] Kreps B H., The rising costs of fossil-fuel extraction: An energy crisis that will not go away, Am J Econ Sociol, 79, 3, (2020)
  • [3] Xiao J D, Jiang H L., Metal-organic frameworks for photocatalysis and photothermal catalysis, Acc Chem Res, 52, 2, (2019)
  • [4] Kabir E, Kumar P, Kumar S, Et al., Solar energy: Potential and future prospects, Renew Sustain Energy Rev, 82, (2018)
  • [5] Jeon T H, Koo M S, Kim H, Et al., Dual-functional photocatalytic and photoelectrocatalytic systems for energy- and resource-recovering water treatment, ACS Catal, 8, 12, (2018)
  • [6] Peng J H, Chen X Z, Ong W J, Et al., Surface and heterointerface engineering of 2D MXenes and their nanocomposites: Insights into electro- and photocatalysis, Chem, 5, 1, (2019)
  • [7] Zhu L L, Gao M M, Peh C K N, Et al., Solar-driven photothermal nanostructured materials designs and prerequisites for evaporation and catalysis applications, Mater Horiz, 5, 3, (2018)
  • [8] Zhang L P, Lin C Y, Zhang D T, Et al., Guiding principles for designing highly efficient metal-free carbon catalysts, Adv Mater, 31, 13, (2019)
  • [9] Wang W, Tade M O, Shao Z P., Nitrogen-doped simple and complex oxides for photocatalysis: A review, Prog Mater Sci, 92, (2018)
  • [10] Twilton J, Le C, Zhang P, Et al., The merger of transition metal and photocatalysis, Nat Rev Chem, 1, (2017)
12345678910