Infill Toolpath Optimization for Fused Deposition Modeling Based on Principal Stress Lines

被引：0
|
作者：
Li, Shuaishuai [1 ]
Xu, Huiliang [1 ]
Chen, Ziqian [1 ]
Yu, Ying [1 ]
Wang, Yu [2 ]
机构：
[1] School of Mechanical Engineering, Tongji University, Shanghai,201804, China
[2] China Sino-German College of Applied Sciences, Tongji University, Shanghai,201804, China
来源：
Tongji Daxue Xuebao/Journal of Tongji University | 2021年 / 49卷 / 04期
关键词：
422 Strength of Building Materials; Test Equipment and Methods - 511.1 Oil Field Production Operations - 745.2 Reproduction; Copying - 802.3 Chemical Operations - 913.4 Manufacturing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
20
引用
下载
收藏
页码：526 / 534
相关论文
共 50 条
  • [1] Incorporating Kinematic Properties into Fused Deposition Toolpath Optimization
    Lensgraf, Samuel
    Mettu, Ramgopal R.
    2018 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2018, : 8622 - 8627
  • [2] A Heterogeneous Infill Technique for Fused Deposition Modeling
    Giannatsis, John
    Vassilakos, Aggelos
    Dedoussis, Vassilis
    30TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2021), 2020, 51 : 642 - 648
  • [3] Modeling and analysis of surface roughness in fused deposition modeling based on infill patterns
    Patil, Pooja
    Raykar, Sunil J.
    Bhamu, Jaiprakash
    Singh, Dharmendra
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2022, 29 (01) : 92 - 99
  • [4] OPTIMIZATION OF PROCESS PARAMETERS IN FUSED DEPOSITION MODELING USING WEIGHTED PRINCIPAL COMPONENT ANALYSIS
    Sood, Anoop Kumar
    Chaturvedi, Vedansh
    Datta, Saurav
    Mahapatra, Siba Sankar
    JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2011, 10 (02) : 241 - 259
  • [5] Topology optimization for fused deposition modeling process
    Rezaie, R.
    Badrossamay, M.
    Ghaie, A.
    Moosavi, H.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 521 - 526
  • [6] DERIVING INFILL DESIGN OF FUSED DEPOSITION MODELLED PARTS FROM PREDICTED STRESS PROFILES
    Gopsill, James A.
    Hicks, Ben J.
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2016, VOL 2A, 2016,
  • [7] Multitemperature parameter optimization for fused deposition modeling based on response surface methodology
    Wang, Zhi
    Li, Jing
    Wu, Wenjie
    Zhang, Daijun
    Yu, Ning
    AIP ADVANCES, 2021, 11 (05)
  • [8] Process-Parameter Optimization for Fused Deposition Modeling Based on Taguchi Method
    Zhang Jinwen
    Peng Anhua
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 444 - 447
  • [9] Optimization of fused deposition modeling process using teaching-learning-based optimization algorithm
    Rao, R. Venkata
    Rai, Dhiraj P.
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2016, 19 (01): : 587 - 603
  • [10] Investigation and Optimization of Thermoplastic Material by Fused Deposition Modeling
    Ramachandran P.
    Pandian P.
    Antony J.J.B.J.P.
    International Journal of Vehicle Structures and Systems, 2023, 15 (04) : 559 - 561
12345