Study on bamboo fiber and sodium alginate enhancing the degradability of polylactic acid

被引：0
|
作者：
Chai X. [1 ]
Zhou L. [1 ]
He C. [1 ]
机构：
[1] College of Engineering, Nanjing Agricultural University, Nanjing
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2023年 / 40卷 / 06期
关键词：
bamboo fiber; degradability; polylactic acid; sodium alginate; soil degradation;
D O I：
10.13801/j.cnki.fhclxb.20220901.003
中图分类号：
学科分类号：
摘要：
In order to improve the degradability of polylactic acid (PLA), bamboo fiber (BF) and sodium alginate (SA) were blended with PLA to prepare composite materials. And then the PLA composites were buried in soil for degradation test. The mass loss, morphological properties, FTIR, thermal properties and crystallinity of the PLA composites were measured after degradation. The results shown that both SA and BF can improve the mass loss of PLA composites during degradation. After 21 days of degradation, the mass loss rates of BF/PLA and SA-BF/PLA composites were 0.83% and 2.54%, which were 7.55 and 23.09 times higher than that of pure PLA (0.11%), respectively. A large number of cracks and depressions appeared on the surface of SA-BF/PLA composites after degradation, which increased the contact area between the PLA composites and the soil, and thus accelerated the degradation of the PLA composites. The mass loss rate of PLA materials was very low after degradation, but the carbanyl group of PLA materials increased significantly, this indicated that soil degradation could lead to the fracture of some PLA long-chain polymers into small molecules. Compared with pure PLA, the crystallinity of BF/PLA and SA-BF/PLA composites was significantly reduced, this meant that SA and BF could reduce the crystallinity of the PLA composites and enhance their degradability. The results indicated that SA and BF can improve the degradability of PLA composites. The results would provide theoretical reference for the preparation of highly degradable PLA composites. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：3553 / 3561
页数：8
相关论文
共 34 条
  • [1] LIM L T, AURAS R, RUBINO M., Processing technologies for poly (lactic acid)[J], Progress in Polymer Science, 33, 8, pp. 820-852, (2008)
  • [2] HUANG Zixiang, LIU Yifan, WANG Yue, Et al., Preparation and performance characterization of biodegradable poly(lactic acid) composite membrane, Plastics, 50, 1, pp. 117-122, (2021)
  • [3] NASER A Z, DEIAB I, DARRAS B M., Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: A review[J], RSC Advances, 11, 28, pp. 17151-17196, (2021)
  • [4] NIKOLAIVITS E, PANTELIC B, AZEEM M, Et al., Progressing plastics circularity: A review of mechano-biocatalytic approaches for waste plastic (Re) valorization[J], Frontiers in Bioengineering and Biotechnology, 9, pp. 1-31, (2021)
  • [5] BAI Congyan, ZHANG Hong, WEI Xiaohong, Study of microbial degradation performance of polyethylene plastics baiconyan[J], Shangdong Chemical Industry, 51, 2, pp. 42-44, (2022)
  • [6] ARMENTANO I, BITINIS N, FORTUNATI E, Et al., Multifunctional nanostructured PLA materials for packaging and tissue engineering[J], Progress in Polymer Science, 38, 10-11, pp. 1720-1747, (2013)
  • [7] RAMESHKUMAR S, SHAIJU P, O'CONNOR K E, Et al., Bio-based and biodegradable polymers-State-of-the-art, challenges and emerging trends[J], Current Opinion in Green and Sustainable Chemistry, 21, pp. 75-81, (2020)
  • [8] YANG N, SUN Z X, FENG L S, Et al., Plastic film mulching for water-efficient agricultural applications and degradable films materials development research[J], Materials and Manufacturing Processes, 30, 2, pp. 143-154, (2015)
  • [9] CHEN Qian, ZENG Wei, SHI Yikang, Et al., Preparation and properties of polylactic acid composite modified by bacterial cellulose[J], Acta Materiae Compositae Sinica, 40, 3, pp. 1430-1437, (2023)
  • [10] SUN C, WEI S Y, TAN H Y, Et al., Progress in upcycling polylactic acid waste as an alternative carbon source: A review[J], Chemical Engineering Journal, 446, pp. 1-21, (2022)
1234