Performance parameter augment method for on-wing remaining useful life prediction of aircraft auxiliary power unit

被引:0
|
作者
Liu L. [1 ]
Zhang H. [2 ]
Liu X. [1 ]
Wang L. [3 ]
Liang J. [1 ]
机构
[1] Department of Test and Control Engineering, Harbin Institute of Technology, Harbin
[2] Automatic Test and Control Institute, Harbin Institute of Technology, Harbin
[3] Shenyang Maintenance Base, China Southern Airlines Co., Ltd., Shenyang
关键词
Auxiliary power unit; Fault prognostics; Generative adversarial network; On-wing life; Parameter augment;
D O I
10.19650/j.cnki.cjsi.J2006238
中图分类号
学科分类号
摘要
The dimension of on-wing performance parameters of the aircraft auxiliary power unit (APU) is low, it is difficult to obtain high accuracy fault prognostics result. To solve this problem, a performance parameter augment method is proposed, which is based on the generative adversarial networks (GAN). Firstly, the principle of GAN is studied, based on which the optimization parameters of the generator and discriminator are determined through the grid search algorithm. Then, the augment method facing to APU performance degradation parameter is studied, which provides the input parameters for remaining useful life (RUL) prediction of APU. Finally, the proposed method was verified and evaluated by utilizing the real on-wing monitoring data of APU from China Southern Airlines fleet. The generated 10 D exhaust temperature parameters based on GAN were processed with Euclidean distance, Pearson correlation coefficient and Kullback-Leibler divergence methods, the results show that the generated data and original data have good consistency. In the comparison experiments based on the three RUL prediction methods, the generated data and original data are both utilized for the RUL prediction, the prediction result accuracies characterized with the mean absolute error and root mean square error are improved by 8.55% and 3.62% at least compared with those using only the original performance parameters for the RUL prediction. © 2020, Science Press. All right reserved.
引用
收藏
页码:107 / 116
页数:9
相关论文
共 28 条
  • [1] HUANG G P, LIANG D W, HE ZH Q., Comparison of technical characteristics of APU and microturbine engines for large aircraft, Journal of Aerospace Power, 23, 2, pp. 383-388, (2008)
  • [2] TAM C K W, PARRISH S A, XU J, Et al., Indirect combustion noise of auxiliary power units, Journal of Sound and Vibration, 332, 17, pp. 4004-4020, (2013)
  • [3] ANGHEL C., A novel start system for an aircraft auxiliary power unit, Energy Conversion Engineering Conference and Exhibit, pp. 7-11, (2000)
  • [4] LETOURNEAU S, YANG C SH, LIU Z K., Improving preciseness of time to failure predictions: Application to APU starter, IEEE International Conference on Prognostics and Health Management, pp. 1-7, (2008)
  • [5] YANG C SH, LOU Q F, LIU J, Et al., Particle filter-based method for prognostics with application to auxiliary power unit. modern advances in applied intelligence, pp. 198-207, (2014)
  • [6] SAMSUN R C, KRUPP C, TSCHAUDER A, Et al., Electrical start-up for diesel fuel processing in a fuel-cell-based auxiliary power unit, Journal of Power Sources, 302, pp. 315-323, (2016)
  • [7] YANG C SH, LETOURNEAU S, ZALUSKI M, Et al., APU FMEA validation and its application to fault identification, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 959-967, (2010)
  • [8] YANG C SH, LETOURNEAU S, YANG Y B, Et al., Data mining based fault isolation with FMEA rank: A case study of APU fault identification, IEEE Prognostics and Health Management, pp. 1-6, (2013)
  • [9] YANG C SH, LETOURNEAU S, ZALUSKI M., Using the validated FMEA to update trouble shooting manuals: A case study of APU TSM revision, Annual Conference of the Prognostics and Health Management Society, pp. 1-11, (2011)
  • [10] AN D, KIM N H, CHOI J H., Practical options for selecting data-driven or physics-based prognostics algorithms with reviews, Reliability Engineering & System Safety, 133, pp. 223-236, (2015)