Modeling and analysis of grinding force for grinding titanium alloy with abrasive belt assisted by ultrasonic vibration

被引：0
|
作者：
Huang Z. [1 ]
Min J. [1 ]
Zhou T. [1 ]
Yang J. [2 ]
Xiao L.-X. [2 ]
Li L.-Z. [2 ]
机构：
[1] School of Mechanical and Electrical Engineering, University of Electronic Science and Technology, Chengdu
[2] Sichuan Chengfei Integration Technology Corp., Chengdu
来源：
Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) | 2023年 / 53卷 / 11期
关键词：
abrasive belt grinding; grinding force; titanium alloy; ultrasonic vibration;
D O I：
10.13229/j.cnki.jdxbgxb.20211429
中图分类号：
学科分类号：
摘要：
Based on Hertz contact theory，the contact model of contact wheel and workpiece is simplified to analyze the principle of ultrasonic vibration belt grinding，and the motion characteristics of ultrasonic assisted abrasive particles are analyzed. By dividing grinding force into cutting deformation force and friction force，the influence of ultrasonic vibration on cutting deformation force and friction force is analyzed. The results show that the proposed model has high prediction accuracy and provides effective reference and theoretical basis for subsequent practical machining guidance. © 2023 Editorial Board of Jilin University. All rights reserved.
引用
收藏
页码：3069 / 3077
页数：8
相关论文
共 23 条
  • [1] Xu X, Zhu D, Wang J, Et al., Calibration and accuracy analysis of robotic belt grinding system using the ruby probe and criteria sphere, Robotics and Computer-Integrated Manufacturing, 51, pp. 189-201, (2018)
  • [2] Yu T B, Yang X Z, An J H, Et al., Material removal mechanism of two-dimensional ultrasonic vibration assisted polishing Inconel718 nickel-based alloy, Int J Adv Manuf Technol, 96, pp. 657-667, (2018)
  • [3] Jiao F, Zhao B, Liu C S, Et al., Material removal rate characteristics in ultrasonic aided lapping of engineering ceramics based on single-point scratch, Key Engineering Materials, 375, 376, pp. 263-267, (2008)
  • [4] Wu Y, Sun A G, Zhao B, Et al., Modeling of high efficiency removal in the grinding of aluminal/ZrO2 nanocomposites with the aid of two-dimensional ultrasonic vibration, Key Engineering Materials, 329, pp. 451-458, (2007)
  • [5] Kuo K L, Tsao C C., Rotary ultrasonic-assisted milling of brittle materials, Transactions of Nonferrous Metals Society of China, 22, pp. 793-800, (2012)
  • [6] Yan Y Y, Zhao B, Wu Y, Et al., Study on material removal mechanism of fine-crystalline ZrO2 ceramics under two dimensional ultrasonic grinding, Materials Science Forum, 532, 533, pp. 532-535, (2006)
  • [7] Yan W, Bo Z, Xun S Z., Modeling of material removal in workpiece lateral ultrasonic vibration grinding of fine-crystalline zirconia ceramics, Key Engineering Materials, 315, 4, pp. 304-308, (2006)
  • [8] Zhao Bo, Chen Fan, Tong Jing-lin, Theoretical and experimental research on material removal rate under ultrasonic grinding, Journal of Henan Polytechnic University (Natural Science Edition), 32, 3, pp. 302-307, (2013)
  • [9] Suzuki K, Uematsu T, Makizaki T, Et al., Ultrasonic grinding utilizing a stator of an ultrasonic motor, The Proceedings of The Manufacturing & Machine Tool Conference, 2, pp. 183-184, (2000)
  • [10] Shen J Y, Dai B, Wu X, Et al., Study on the material removal mechanism of glass in single diamond grain grinding with ultrasonic vibration assisted, Int J of Abrasive Technology, 9, 1, pp. 60-72, (2019)
123