Tuning the excitation wavelength of luminescent Mn2+-doped ZnSxSe1-x obtained by mechanically induced self-sustaining reaction

被引:0
|
作者
Avilés, M.A. [1 ]
Gotor, F.J. [1 ]
机构
[1] Instituto de Ciencia de Materiales de Sevilla (CSIC-US), Sevilla,41092, Spain
关键词
D O I
暂无
中图分类号
学科分类号
摘要
Mn2+-doped ZnSxSe1–x solid solution samples (Mn:ZnSxSe1-x) were synthesized by the mechanochemical process denoted as mechanically-induced self-sustaining reaction from Mn/Zn/S/Se powder elemental mixtures. The samples were characterized by X-ray diffraction, scanning electron microscopy, diffuse reflectance UV–Vis spectroscopy and emission and excitation photoluminescence measurements. The band-gap energy of samples was controlled by changing the stoichiometry, x, of the solid solution. All samples showed the characteristic Mn2+4T1-6A1 emission at ~588 nm when exciting the host material, so it was possible to tune the excitation wavelength from 349 nm to 467 nm. However, an efficiency loss was observed with increasing Se content, probably due to the overlap between the absorption and emission spectra that induced self-absorption and emission quenching. © 2021 The Author(s)
引用
收藏
相关论文
共 19 条
  • [1] Tuning the excitation wavelength of luminescent Mn2+-doped ZnSxSe1-x obtained by mechanically induced self-sustaining reaction
    Avil, M. A.
    Gotor, F. J.
    [J]. OPTICAL MATERIALS, 2021, 117
  • [2] Synthesis of Mn2+-doped ZnS by a mechanically induced self-sustaining reaction
    M. A. Avilés
    J. M. Córdoba
    M. J. Sayagués
    F. J. Gotor
    [J]. Journal of Materials Science, 2020, 55 : 1603 - 1613
  • [3] Synthesis of Mn2+-doped ZnS by a mechanically induced self-sustaining reaction
    Aviles, M. A.
    Cordoba, J. M.
    Sayagues, M. J.
    Gotor, F. J.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2020, 55 (04) : 1603 - 1613
  • [4] Spark plasma sintering of TiyNb1-yCxN1-x monolithic ceramics obtained by mechanically induced self-sustaining reaction
    Borrell, Amparo
    Dolores Salvador, Maria
    Garcia-Rocha, Victoria
    Fernandez, Adolfo
    Chicardi, Ernesto
    Gotor, Francisco J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 543 : 173 - 179
  • [5] Creep behavior of TiCxN1-x-CoTi cermets synthesized by mechanically induced self-sustaining reaction
    Morales-Rodriguez, A.
    Gallardo-Lopez, A.
    Dominguez-Rodriguez, A.
    Cordoba, J. M.
    Aviles, M. A.
    Gotor, F. J.
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (03) : 299 - 302
  • [6] Spark Plasma Sintering of Ultrafine TiCxN1-x Powders Synthesized by a Mechanically Induced Self-Sustaining Reaction
    Borrell, Amparo
    Fernandez, Adolfo
    Torrecillas, Ramon
    Cordoba, Jose M.
    Aviles, Miguel A.
    Gotor, Francisco J.
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2010, 93 (08) : 2252 - 2256
  • [7] Effects of additives on the synthesis of TiCxN1-x by a solid-gas mechanically induced self-sustaining reaction
    Chicardi, E.
    Gotor, F. J.
    Alcala, M. D.
    Cordoba, J. M.
    [J]. CERAMICS INTERNATIONAL, 2018, 44 (07) : 7605 - 7610
  • [8] Influence of milling parameters on the solid-gas synthesis of TiCxN1-x by mechanically induced self-sustaining reaction
    Chicardi, E.
    Gotor, F. J.
    Alcala, M. D.
    Cordoba, J. M.
    [J]. POWDER TECHNOLOGY, 2017, 319 : 12 - 18
  • [9] Mechanosynthesis of nanocrystalline ZrB2-based powders by mechanically induced self-sustaining reaction method
    Jalaly, M.
    Bafghi, M. Sh.
    Tamizifar, M.
    Gotor, F. J.
    [J]. ADVANCES IN APPLIED CERAMICS, 2013, 112 (07) : 383 - 388
  • [10] Effect of processing parameters on the formation of TiB2 nanopowder by mechanically induced self-sustaining reaction
    Nasiri-Tabrizi, Bahman
    Adhami, Touraj
    Ebrahimi-Kahrizsangi, Reza
    [J]. CERAMICS INTERNATIONAL, 2014, 40 (05) : 7345 - 7354