Review of bubble breakup modelling and experimental study in turbulent flow

被引:0
|
作者
Zhang H. [1 ]
Wang Y. [1 ]
Li B. [1 ]
Wang T. [1 ]
机构
[1] Department of Chemical Engineering, Tsinghua University, Beijing
来源
Huagong Xuebao/CIESC Journal | 2021年 / 72卷 / 12期
关键词
Bubble breakup model; Daughter bubble size distribution; Single bubble breakup experiment; Turbulence;
D O I
10.11949/0438-1157.20211345
中图分类号
学科分类号
摘要
The mechanisms and models of bubble breakup in a fully developed turbulent flow are reviewed. The breakup mechanisms are classified into four categories: turbulent eddy collision, viscous shear stress, vortex shear shedding-off, and interfacial instability. The reported models for predicting the bubble breakup rate and daughter bubble size distribution are systematically summarized. The development and limitations of the existing bubble breakup models are analyzed and discussed, and the future direction of model development and improvement are proposed. Experimental studies of breakup of single bubbles in turbulent flow are summarized. According to the methods of producing turbulence, the experiments are divided into four types: turbulence generated by increasing liquid velocity, turbulence generated by internals, turbulence generated by stirring, and turbulence generated by conical reactor and stirring. The development and limitations of existing bubble breakup experiments are discussed. Finally, the bubble breakup rates predicted by the models are compared with experimental data, showing that several bubble breakup models in the literature have good prediction ability. © 2021, Editorial Board of CIESC Journal. All right reserved.
引用
收藏
页码:5936 / 5954
页数:18
相关论文
共 77 条
  • [1] Jia H, Lian P, Leng X, Et al., Mechanism studies on the application of the mixed cationic/anionic surfactant systems to enhance oil recovery, Fuel, 258, (2019)
  • [2] Ruzicka M C, Vecer M M, Orvalho S, Et al., Effect of surfactant on homogeneous regime stability in bubble column, Chemical Engineering Science, 63, 4, pp. 951-967, (2008)
  • [3] Wu Y N, Fang S S, Zhang K Y, Et al., Stability mechanism of nitrogen foam in porous media with silica nanoparticles modified by cationic surfactants, Langmuir, 34, 27, pp. 8015-8023, (2018)
  • [4] Zhao M W, Wang R Y, Dai C L, Et al., Adsorption behaviour of surfactant-nanoparticles at the gas-liquid interface: influence of the alkane chain length, Chemical Engineering Science, 206, pp. 203-211, (2019)
  • [5] Petkova B, Tcholakova S, Chenkova M, Et al., Foamability of aqueous solutions: role of surfactant type and concentration, Advances in Colloid and Interface Science, 276, (2020)
  • [6] Ramezani M, Legg M J, Haghighat A, Et al., Experimental investigation of the effect of ethyl alcohol surfactant on oxygen mass transfer and bubble size distribution in an air-water multiphase Taylor-Couette vortex bioreactor, Chemical Engineering Journal, 319, pp. 288-296, (2017)
  • [7] AlYousef Z A, Almobarky M A, Schechter D S., The effect of nanoparticle aggregation on surfactant foam stability, Journal of Colloid and Interface Science, 511, pp. 365-373, (2018)
  • [8] Bera B, Carrier O, Backus E H G, Et al., Counteracting interfacial energetics for wetting of hydrophobic surfaces in the presence of surfactants, Langmuir, 34, 41, pp. 12344-12349, (2018)
  • [9] Tanaka S, Kastens S, Fujioka S, Et al., Mass transfer from freely rising microbubbles in aqueous solutions of surfactant or salt, Chemical Engineering Journal, 387, (2020)
  • [10] Zhang H H, Wang T F., Generality of CFD-PBM coupled model for simulations of gas-liquid bubble column, CIESC Journal, 70, 2, pp. 487-495, (2019)