Controlled switching strategies to eliminate the inrush current of converter transformer

被引：0

作者：

Zhang R. ^{[1
]}

Gan Z. ^{[1
]}

Zhang P. ^{[1
]}

Wen W. ^{[2
]}

Yang J. ^{[1
]}

Wang G. ^{[2
]}

机构：

[1] Qujing Bureau, EHV Power Transmission Company of China Southern Power Grid, Qujing

[2] School of Electrical Engineering, Wuhan University, Wuhan

来源：

Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control | 2019年 / 47卷 / 15期

关键词：

Control strategy; Controlled switching; Converter transformer; DC transmission; Inrush currents;

D O I：

10.19783/j.cnki.pspc.181060

中图分类号：

学科分类号：

摘要：

An equivalent circuit model considering the non-linear hysteresis characteristics of iron core is established for 500 kV converter transformer composed of single-phase transformers. The influence of closing angle and core remanence on the no-load excitation inrush currents of converter transformer is simulated and analyzed. The results show that when the core remanence is negligible, the phase controlled switching strategy is that phase A closes at the peak voltage moment, and phase B and C close simultaneously with a delay of 5 ms. When considering the effect of core remanence, the no-load switching strategy must consider the order of three-phase breaking moment as the transformer is removed, the phase controlled closing strategy is that the second breaking phase with the largest remanence closes first. If the maximum remanence is positive (or negative), the moment of switch is about 0.6 ms ahead of the negative (or positive) peak time of the bus voltage, the delay time of first break phase is about 5.45 ms and the last break phase is about 6.14 ms. The method can restrain the inrush current effectively. © 2019, Power System Protection and Control Press. All right reserved.

引用

页码：69 / 77

页数：8

共 23 条

[1] Xing Y., Luo J., Zhou J., Et al., Estimation of remanence in transformer core, Power System Technology, 35, 2, pp. 169-172, (2011)
[2] Randy H., Analysis of transformer inrush current and comparison of harmonic restraint methods in transformer protection, IEEE Transactions on Industry Applications, 49, 3, pp. 1890-1896, (2013)
[3] Zhang Y., Yang J., Analysis of overload protection action of AC filter caused by excessive magnetizing inrush current, Electric Power Automation, 5, pp. 43-46, (2018)
[4] Wu G., Improvement measures for transformer inrush current protection and protection trip in high speed railway, China Railway, 5, pp. 44-46, (2018)
[5] Liang J., Zhang Z., Yuan M., Et al., Design of power amplifier for magnetic coupling wireless power transmission system, Joumal of Henan Normal University (Natural Science Edition), 45, 1, pp. 120-124, (2017)
[6] Fu C., Analysis on transformer excitation current to the differential protection and improvement measures, Electrician Technology, 1, pp. 102-103, (2018)
[7] Song W., Tang B., Hu X., Et al., Analysis of maloperation accident of transformer differential protection caused by magnetizing inrush current, Shanghai Electric Technology, 10, 2, pp. 40-43, (2017)
[8] Li X., Zhang D., Ding X., Et al., Analysis of positive sequence two harmonic characteristics of converter transformer and sympathetic inrush current, Automation of Electric Power Systems, 42, 13, pp. 1-6, (2018)
[9] Zhao Y., Li Q., Zhou F., Et al., Mechanism and influencing factors of electric locomotive sympathetic inrush, Power System Protection and Control, 45, 12, pp. 44-52, (2017)
[10] Wuyun G., Analyze and study of control strategy of transformer inrush current, (2009)

← 1 2 3 →