Acoustic performance and modal analysis for the muffler of a four-stroke three-cylinder inline spark ignition engine

This work presents a concise analytical report on four suggested design modifications (geometrical configuration of the resonating chamber) of a practical muffler model based on acoustic performance and reduction of back pressure. The existing model shows a very low acoustic transmission loss (15.8 dB) with a back pressure of nearly 2.52 × 105 Pa. The second proposed model provided better attenuation of 23.2 dB transmission loss but produced more back pressure (2.70 × 105 Pa). Modification of the second model by tapering of the inlet pipe's outlet accounted for the reduction in back pressure to around 2.30 × 105 Pa and increased the noise attenuation level by 1.2 dB. More significant attenuation of noise (14.8 dB) was observed in the fourth model without any back pressure. The fifth model produced the highest attenuation of 57.1 dB as compared to the other four models with undesirable highest back pressure around 2.83 × 105 Pa. © 2021 Inderscience Enterprises Ltd.. All rights reserved.