Finite element analysis of oil palm fiber reinforced thermoplastic composites for fused deposition modeling

被引：2
|
作者：
Ahmad, Mohd Nazri [1 ,4 ,7 ]
Ishak, Mohamad Ridzwan [1 ,2 ,3 ]
Mohammad Taha, Mastura [4 ]
Mustapha, Faizal [1 ]
Leman, Zulkiflle [5 ,6 ]
机构：
[1] Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor, Serdang,43400, Malaysia
[2] Aerospace Malaysia Research Centre (AMRC), Universiti Putra Malaysia, Selangor, Serdang,43400, Malaysia
[3] Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Selangor, Serdang,43400, Malaysia
[4] Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
[5] Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor, Serdang,43400, Malaysia
[6] Advanced Engineering Materials and Composites Research Centre, Faculty of Engineering, Universiti Putra Malaysia, Selangor, Serdang,43400, Malaysia
[7] Centre of Smart System and Innovative Design, Universiti Teknikal Malaysia Melaka Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
来源：
Materials Today: Proceedings | 2023年 / 74卷
关键词：
D O I：
10.1016/j.matpr.2022.12.052
中图分类号：
学科分类号：
摘要：
25
引用
收藏
页码：509 / 512
相关论文
共 50 条
  • [1] Rheological and Morphological Properties of Oil Palm Fiber-Reinforced Thermoplastic Composites for Fused Deposition Modeling (FDM)
    Ahmad, Mohd Nazri
    Ishak, Mohamad Ridzwan
    Taha, Mastura Mohammad
    Mustapha, Faizal
    Leman, Zulkiflle
    POLYMERS, 2021, 13 (21)
  • [2] Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites
    Ahmad, Mohd Nazri
    Ishak, Mohamad Ridzwan
    Mohammad Taha, Mastura
    Mustapha, Faizal
    Leman, Zulkiflle
    Anak Lukista, Debby Dyne
    Irianto
    Ghazali, Ihwan
    POLYMERS, 2022, 14 (11)
  • [3] Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
    Ning, Fuda
    Cong, Weilong
    Qiu, Jingjing
    Wei, Junhua
    Wang, Shiren
    COMPOSITES PART B-ENGINEERING, 2015, 80 : 369 - 378
  • [4] Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling
    Gray, RW
    Baird, DG
    Bohn, JH
    POLYMER COMPOSITES, 1998, 19 (04) : 383 - 394
  • [5] Short fiber reinforced composites for fused deposition modeling
    Zhong, WH
    Li, F
    Zhang, ZG
    Song, LL
    Li, ZM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 301 (02): : 125 - 130
  • [6] Finite Element Analysis for Thermoforming Process of Continuous Fiber Reinforced Thermoplastic Composites
    Abadi, Mohammad Tahaye
    POLYMER COMPOSITES, 2009, 30 (02) : 138 - 146
  • [7] Mechanical characteristics of oil palm fiber reinforced thermoplastics as filament for fused deposition modeling (FDM)
    Mohd Nazri Ahmad
    Mohammad Khalid Wahid
    Nurul Ain Maidin
    Mohd Hidayat Ab Rahman
    Mohd Hairizal Osman
    Izzati Fatin Alis@Elias
    Advances in Manufacturing, 2020, 8 : 72 - 81
  • [8] Mechanical characteristics of oil palm fiber reinforced thermoplastics as filament for fused deposition modeling (FDM)
    Ahmad, Mohd Nazri
    Wahid, Mohammad Khalid
    Maidin, Nurul Ain
    Ab Rahman, Mohd Hidayat
    Osman, Mohd Hairizal
    Elias, Izzati Fatin Alis
    ADVANCES IN MANUFACTURING, 2020, 8 (01) : 72 - 81
  • [9] Modeling of the mechanical properties of fused deposition modeling (FDM) printed fiber reinforced thermoplastic composites by asymptotic homogenization
    Oezen, Arda
    Auhl, Dietmar
    COMPOSITES AND ADVANCED MATERIALS, 2022, 31
  • [10] Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic
    Paolo Bettini
    Gianluca Alitta
    Giuseppe Sala
    Luca Di Landro
    Journal of Materials Engineering and Performance, 2017, 26 : 843 - 848
12345