Fault diagnosis of compressed vibration signal based on 1-dimensional CNN with optimized parameters

被引：2
|
作者：
Ma Y. [1 ]
Jia X. [1 ]
Bai H. [1 ]
Guo C. [1 ]
Wang S. [1 ]
机构：
[1] Department of Equipment Command and Management, Shijiazhuang Campus, Army Engineering University, Shijiazhuang
来源：
| 1911年 / Chinese Institute of Electronics卷 / 42期
关键词：
Compressive sensing; Convolutional neural network (CNN); Fault diagnosis; Multi-objective particle swarm; Orthogonal experiment;
D O I：
10.3969/j.issn.1001-506X.2020.09.05
中图分类号：
学科分类号：
摘要：
In view of the characteristics of multi-parameter for the 1-dimensional convolutional neural network (CNN), a parameter optimization method combining orthogonal test and particle swarm optimization algorithm is proposed and applied to the fault diagnosis of compressed vibration signals. Compressive sensing theory breaks through the limitation of Nyquist sampling theorem and provides an effective way for the collection and transmission of a large number of vibration signals. Firstly, a CNN fault diagnosis model based on compressed signal is established by using the "end-to-end" feature of CNN. The orthogonal test is used to make a rough evaluation of the parameter range, and the best scheme is selected. For each parameter in the scheme, the multi-objective particle swarm optimization algorithm is used to refine it, and the optimal value of each parameter is obtained. The measured signal of gear box and bearing signal from Case Western Reserve University are selected as the research objects. The experimental results show that after optimization, the output characteristic classification of non-inferior particles is obvious, and the CNN diagnosis rate is significantly improved. The results also prove the feasibility of direct fault diagnosis for compressed signals. © 2020, Editorial Office of Systems Engineering and Electronics. All right reserved.
引用
收藏
页码：1911 / 1919
页数：8
相关论文
共 30 条
  • [1] HINTON G E, SALAKHUTDINOV R R., Reducing the dimensionality of data with neural network, Science, 313, 5786, pp. 504-507, (2006)
  • [2] ZHOU Q C, LIU X C, ZHAO J, Et al., Fault diagnosis for rotating machinery based on 1D depth convolutional neural network, Journal of Vibration and Shock, 37, 23, pp. 31-37, (2018)
  • [3] ZHAO C H, HU H X, CHEN B J, Et al., Bearing fault diagnosis based on deep learning feature extraction and WOA-SVM state recognition, Journal of Vibration and Shock, 38, 10, pp. 31-37, (2019)
  • [4] SHAO H D, JIANG H K, ZHAO H W, Et al., A novel deep autoencoder feature learning method for rotating machinery fault diagnosis, Mechanical Systems & Signal Processing, 95, pp. 187-204, (2017)
  • [5] QU J L, YU L, YUAN T, Et al., A hierarchical intelligent fault diagnosis algorithm based on convolutional neural network, Control and Decision, 34, 12, pp. 2619-2626, (2019)
  • [6] FENG J, LEI Y G, LIN J, Et al., Deep neural networks: a promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data, Mechanical Systems & Signal Processing, 72, 73, pp. 303-315, (2016)
  • [7] LU C, WANG Z Y, QIN W L, Et al., Fault diagnosis of rotary machinery components using a stacked denoising autoencoder-based health state identification, Signal Processing, 130, pp. 377-388, (2017)
  • [8] GAN M, WANG C, ZHU C A., Construction of hierarchical diagnosis network based on deep learning and its application in the fault pattern recognition of rolling element bearings, Mechanical Systems & Signal Processing, 72, 73, pp. 92-104, (2016)
  • [9] REN H, QU J F, CHAI Y, Et al., Deep learning for fault diagnosis: The state of the art and challenge, Control and Decision, 32, 8, pp. 345-358, (2017)
  • [10] KRIZHEVSKY A, SUTSKEVER I, HINTON G E., ImageNet classification with deep convolutional neural networks, Advances in neural information processing systems, 25, 2, pp. 1097-1105, (2012)
123