Template Stripping Method for High-performance Perovskite Single-crystalline Thin-film Photodetectors

被引:0
|
作者
Shan D. [1 ]
Zhang H. [1 ]
Zhang Q. [1 ]
Zhagn H. [1 ]
Ding R. [1 ]
机构
[1] State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun
来源
基金
中国国家自然科学基金;
关键词
hybrid perovskite semiconductors; perovskite single-crystalline thin-films; photodetectors; template stripping method;
D O I
10.37188/CJL.20230271
中图分类号
学科分类号
摘要
Hybrid perovskite semiconductors have attracted enormous interest in the field of optoelectronic devices for creating high-performance solar cells,light-emitting diodes,and photodetectors owing to their tunable narrow band gap,high optical absorption,high charge-carrier mobility,and low cost,etc. Among them,perovskite single-crystalline thin-films show greater promise as an ideal matrix for optoelectronic applications because of their absence of grain boundaries,lower impurity,and lower defect densities. The space-confined method was usually used for the growth of perovskite single-crystalline thin-films,where a polymer hole-transport layer was employed to accelerate the ion diffusion. However,this solution-processed method will inevitably bring in the interfacial defects and induce poor charge-carrier injection between the perovskite single-crystalline thin-film and hole-transport layer. Herein,we introduced the template stripping method to solve this problem that enables direct thermal-deposition onto two sides of the perovskite single-crystalline thin-film. A novel perovskite single-crystalline thin-film photodetector can be constructed by a device structure of Cu/BCP/C60/MAPbBr3/MoO3/Ag. Then,an ultrasensitive and fast perovskite single-crystalline thin-film photodetector can be realized with an on-off ratio of 3. 1 × 103,a responsivity up to 7. 15 A/W,a detectivity of 5. 39 × 1012 Jones,and an external quantum efficiency of 1794%,due to the optimal device structure and improved charge-carrier transport. These results indicate that the template stripping method provides a feasible approach to further improve the performance of perovskite single-crystal photodetectors. © 2024 Editorial Office of Chinese Optics. All rights reserved.
引用
下载
收藏
页码:195 / 203
页数:8
相关论文
共 31 条
  • [1] CHEN Y M, ZHANG R Q,, Et al., A fabrication process for flexible single-crystal perovskite devices[J], Na⁃ ture, 583, 7818, pp. 790-795, (2020)
  • [2] ZENG L H,, HAN W,, REN X Y,, Et al., Uncooled mid-infrared sensing enabled by chip-integrated low-temperature-grown 2D PdTe<sub>2</sub> Dirac semimetal[J], Nano Lett, 23, 17, pp. 8241-8248, (2023)
  • [3] ZENG L H, Et al., Phase-controlled van Der Waals growth of wafer-scale 2D MoTe<sub>2</sub> layers for integrated high-sensitivity broadband infrared photodetection[J], Light Sci. Appl, 12, 1, (2023)
  • [4] LI W G, WANG X D, LIAO J F, Et al., A laminar MAPbBr<sub>3</sub>/MAPbBr<sub>3-x</sub>I<sub>x</sub> graded heterojunction single crystal for enhancing charge extraction and optoelectronic performance[J], J. Mater. Chem. C, 7, 19, pp. 5670-5676, (2019)
  • [5] Interlayer cation engineering to regulate the photoelectric properties of lead bromide Dion-Jacobson hybrid perovskites[J], J. Mater. Chem. C, 10, 25, pp. 9613-9620, (2022)
  • [6] HAN L P,, LONG W, ZHANG J Q,, Et al., Exploring Bi<sup>3+</sup> distribution characteristics of MAPb<sub>x</sub>Bi<sub>1-x</sub>Br<sub>3</sub> thin films by space-limited method[J], J. Cryst. Growth, 537, (2020)
  • [7] WANG K H, Et al., Structural and photophysical properties of methylammonium lead tribromide (MAPbBr<sub>3</sub>)single crystals[J], Sci. Rep, 7, 1, (2017)
  • [8] Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films[J], Nat. Commun, 7, 1, (2016)
  • [9] YU L Y,, Et al., Single crystal hybrid perovskite field-effect transistors[J], Nat. Commun, 9, 1, (2018)
  • [10] CHEN L R, WANG H, ZHANG W Q, Et al., Surface passivation of MAPbBr<sub>3</sub> perovskite single crystals to suppress ion migration and enhance photoelectronic performance[J], ACS Appl. Mater. Interfaces, 14, 8, pp. 10917-10926, (2022)