Microstructure and Properties of GH3128/Al2O3 Joint Brazed via Reactive Air Brazing with Ag-CuO-NiO-LiAlSiO4 Composite Filler

被引：0

作者：

Chen E. ^{[1
]}

Su X. ^{[1
]}

Xue S. ^{[1
]}

Chen X. ^{[2
]}

Fu R. ^{[1
]}

Zhang X. ^{[1
]}

Cheng B. ^{[1
]}

Wang C. ^{[3
]}

Wang M. ^{[3
]}

机构：

[1] College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing

[2] Shanghai Radio Equipment Research Institute, Shanghai

[3] The 49th Institute of China, Electronics Technology Group Corporation, Harbin

来源：

Cailiao Daobao/Materials Reports | 2024年 / 38卷 / 02期

关键词：

aluminium oxide ceramic; composite filler; GH3128; alloy; interfacial microstructure; mechanical property; reactive air brazing;

D O I：

10.11896/cldb.22090003

中图分类号：

学科分类号：

摘要：

Reactive air brazing(RAB)of Al2O3 ceramic and GH3128 alloy was successfully achieved by using Ag-CuO-NiO-LiAlSiO4 composite filler reinforced by NiO and LiAlSiO4 particles. The effects of NiO and LiAlSiO4 content on the microstructure and the mechanical properties of GH3128/Al2O3 joint were investigated. The interface microstructure and the formation mechanism of the brazed joint were analyzed and discussed either. The results show that a composite oxidation reaction layer including CuCrO4 inner oxide layer and NiO outer oxide layer is formed on the surface of GH3128 alloy, and the interfacial layer with CuAl2O4 as the main component is formed on the surface of Al2O3 ceramic in the brazing process. The addition of NiO improves the wettability of the composite solder. Meanwhile, the addition of LiAlSiO4 reduces the coefficient of thermal expansion of the composite filler metal, the filler metal with low coefficient of thermal expansion can reduce the residual stress of the brazed joint, which greatly improve the performance of the joints. The shear strength of the joint reaches the maximum (61. 8 MPa)when Ag-10%CuO composite filler metal containing 0. 3%NiO(mass fraction)and 4%LiAlSiO4(mass fraction)is used. The typical interfacial microstructure of the joint is GH3128/CuCrO4+CrNi3+NiO+CuO/Ag+CuO+LiAlSiO4/CuAl2O4/Al2O3 © 2024 Cailiao Daobaoshe/ Materials Review. All rights reserved.

引用

共 26 条

[1] Esposito L, Bellosi A, Guicciardi S, Journal of Materials Science, 33, 7, (1998)
[2] Yu X Q, Ma Z P, Zhang Y, Et al., Ordnance Materials Science and Engineering, 44, 1, (2021)
[3] Bai J, Yang X, Xu S, Et al., Scripta Materialia, 68, 6, (2013)
[4] Sang S, Li D, Wang C, Et al., Materials Science and Engineering A, 768, (2019)
[5] Feng Z W, Gao T F, Shao T W, Et al., Transactions of the China Welding Institution, 36, 12, (2015)
[6] Li Z M, Qian S Q, Wang W, Et al., Rare Metal Materials and Engineering, 41, 11, (2012)
[7] Wang Z Q, Cao J, Si X Q, Et al., 10, 1, (2018)
[8] Zhang L X, Lei M, Yang Z Y, Et al., Rare Metal Materials and Engineering, 46, 11, (2017)
[9] Ji Y R, Fu R L, Lv J L, Et al., Ceramics International, 46, 8, (2020)
[10] Chen H, Ren X, Guo W, Et al., Journal of Manufacturing Processes, 56, (2020)

← 1 2 3 →