Design and Experiment on Transverse Axial Flow Flexible Threshing Device for Corn

被引：0
|
作者：
Geng D. [1 ]
He K. [1 ]
Wang Q. [1 ]
Jin C. [1 ]
Zhang G. [1 ]
Lu X. [2 ]
机构：
[1] School of Agricultural Engineering and Food Science, Shandong University of Technology, Zibo
[2] Shandong Polytechnic College, Jining
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2019年 / 50卷 / 03期
关键词：
Corn; Flexibility; Threshing device; Transverse axial;
D O I：
10.6041/j.issn.1000-1298.2019.03.010
中图分类号：
学科分类号：
摘要：
Corn has become the top substitute for rice and wheat, thereby significantly influencing the lives of people involved in increasing corn production. The technology of corn harvesting has been developing toward the direction of mechanical harvesting. At present, corn grain harvesting can complete harvesting, threshing and cleaning process at one time, which reduces operation process and improves working efficiency. It is the development trend of corn harvest. However, the corn grain moisture content restricts the development of corn grain harvest. In order to solve the problem of high maize kernel damaged rate and high un-threshed rate during the corn harvest in Huang-Huai-Hai region, a transverse axial flow corn threshing test system was designed which used flexible tooth and elastic short rasp bar as threshing elements. In order to make the material in the cylinder have a transmission capacity, the flexible tooth and elastic short rasp bar were arranged in four heads. The test system adopted grid concave. Six spiral guide bars were arranged at the inner wall of the cover to assist the speed of material movement. The key design parameters of this type threshing system were calculated and explained. For the sake of reliability, the dynamic balance simulation was carried out with ADAMS software and YYW-1000 dynamic balance machine checked the accuracy. The threshing cylinder speed, concave clearance and feed rate were selected as the influence factors, and the maize kernel damaged rate and un-threshed rate were selected as the performance indexes in the orthogonal experiments. The optimal experimental results were as follows: threshing cylinder speed was 450 r/min, the concave clearance was 40 mm and the feed rate was 8 kg/s. And the corresponding performance indexes were as follows: the maize kernel damaged rate was 0.65%, the un-threshed rate was 0.59%, which could completely reach the requirement of the national standards in China. The research result of the threshing system provided reference for design of the type of corn harvester. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：101 / 108
页数：7
相关论文
共 22 条
  • [1] Chen Z., Hao F., Wang F., Et al., Development of technology and equipment of corn harvester in China, Transactions of the Chinese Society for Agricultural Machinery, 43, 12, pp. 44-50, (2012)
  • [2] Xiang M., Study on the adaptability of corn grain harvesting device, (2014)
  • [3] Lei X., Studies on the feasibility of maize mechanically harvesting grain in Huanghuaihai regions, (2015)
  • [4] Qu Z., Zhang D., Yang L., Et al., Experimental study on feed rate and cylinder speed of longitudinal axial flow maize threshing and separating device, Transactions of the Chinese Society for Agricultural Machinery, 49, 2, pp. 58-65, (2018)
  • [5] Yang L., Wang W., Zhang H., Et al., Improved design and bench test based on tangential flow-transverse axial flow threshing system, Transactions of the CSAE, 34, 1, pp. 35-43, (2018)
  • [6] Di Z., Cui Z., Zhang H., Et al., Design and experiment of rasp bar and nail tooth combined axial flow corn threshing cylinder, Transactions of the CSAE, 34, 1, pp. 28-34, (2018)
  • [7] Burkhardt T.H., Stout B.A., Laboratory investigations of corn shelling utilizing high-velocity impact loading, Transactions of the ASABE, 17, 3, pp. 11-14, (1974)
  • [8] Petkevichius S., Shpokas L., Kutzbach H.D., Investigation of the maize ear threshing process, Biosystems Engineering, 99, 4, pp. 532-539, (2008)
  • [9] Srison W., Chuan-Udom S., Saengprachatanarug K., Design factors affecting losses and power consumption of an axial flow corn shelling unit, Songklanakarin Journal of Science &Technology, 38, 5, pp. 591-598, (2016)
  • [10] He X., Cai X., Shi J., Et al., Research and design on corn sheller by extruding and rubbing method, Transactions of the CSAE, 19, 2, pp. 105-108, (2003)
123