Effects of environmental factors on infrared flash thermography nondestructive testing in outfield detection

被引：0
|
作者：
Liu Y. [1 ,2 ,3 ,4 ]
Xu L. [5 ]
He F. [1 ,2 ,3 ,4 ]
Li S. [1 ,2 ,3 ,4 ]
Yang D. [1 ,2 ,3 ,4 ]
机构：
[1] AECC Beijing Institute of Aeronautical Materials, Beijing
[2] Beijing Key Laboratory of Aeronautical Materials Testing and Evaluation, Beijing
[3] Key Laboratory of Aeronautical Materials Testing and Evaluation, Aero Engine Corporation of China, Beijing
[4] Aviation Key Laboratory of Science and Technology on Materials Testing and Evaluation, Beijing
[5] School of Materials Science and Engineering, Beihang University, Beijing
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2021年 / 50卷 / 12期
关键词：
Infrared thermal wave; Infrared thermographic nondestructive testing; Nondestructive testing; Outfield detection; Testing in service;
D O I：
10.3788/IRLA20210711
中图分类号：
学科分类号：
摘要：
To reveal mechanism of influence of environmental factors such as ambient temperature, sunshine and wind velocity on infrared thermographic nondestructive testing, modeling of a delamination in a glass fiber reinforced plastic specimen in infrared flash thermography testing was made and studied. The model was an axial symmetry model. Thermal signals to be detected in infrared thermographic nondestructive testing, such as temperature difference, the maximum temperature difference, temperature contrast and the maximum temperature contrast, were calculated and analyzed using finite element method in that model. Several experiments with special process treatment on that specimen were carried out. Evolution of the thermal signals with changes of those environmental factors was researched. Comparison of results from modeling and experiment in ambient temperature 25 ℃ and 30 ℃ was made. Results from modeling and experiments in uneven sunshine and in homogeneous temperature were compared too. Results in deferent wind speed were presented at the end of this paper. Convective heat transfer coefficients in the model were 10 W/(m2·K) and 100 W/(m2·K). The simulation results and the experiment results show that the maximum temperature contrast declines with increase of ambient temperature. Decline of the maximum temperature contrast means that clarity of defect gets worse, and detection of defect becomes more difficult. The maximum temperature difference and the maximum temperature contrast increase or decrease due to uneven sunshine on the specimen. Those changes lead to misjudgment or missing detection. Increase of wind velocity may reduce the maximum temperature difference and the maximum temperature contrast, and result in worse detectability and clarity of defect. Copyright ©2021 Infrared and Laser Engineering. All rights reserved.
引用
收藏
相关论文
共 15 条
  • [1] Wang Yaqiong, Research on maintenance and detection of civil aircraft based on infrared thermal Image detection, Modern Manufacturing Technology and Equipment, 11, pp. 169-170, (2019)
  • [2] Cao Qiang, Han Daorong, Application of NDT in military aircraft maintenance, Aviation Maintenance & Engineering, 4, pp. 74-77, (2015)
  • [3] Li Xiufen, Chen Junwen, Jiang Yang, Et al., Application research of penetrant inspection and magnetic particle inspection in aircraft components in service, The 11th National Conference of Penetrant Inspection and Magnetic Particle Inspection, pp. 154-158, (2017)
  • [4] Huang Huabing, Xu Mao, Peng Zhiwei, In-situ testing method of R area for aircraft structure, Nondestructive Testing, 41, 3, pp. 38-41, (2019)
  • [5] Ma Jianhui, Yang Guang, Liu Yong, The in-situ detection of aero-engine turbine blade with endoscope and fluorescence penetration, Nondestructive Testing, 42, 6, pp. 50-53, (2020)
  • [6] Wang Dan, Ning Ning, Yang Pengfei, Et al., In-situ nondestructive testing technology for the integral composite panel of the fuel tank, Nondestructive Testing, 40, 11, pp. 33-36, (2018)
  • [7] Liu Bingwei, Zhong Mian, Fu Hangjun, Et al., Defect extraction and quantitative analysis of composite materials based on infrared detection, Proc of SPIE, 11455, (2020)
  • [8] Liu Yingtao, Mu Rende, Guo Guangping, Et al., Infrared flash thermographic nondestructive testing of defects in thermal barrier coating, Journal of Aeronautical Materials, 35, 6, pp. 83-90, (2015)
  • [9] Liu Yingtao, Guo Guangping, Yang Danggang, Et al., Pulsed thermography of composite components used in aerospace applications, Journal of Aeronautical Materials, 32, 1, pp. 72-77, (2012)
  • [10] Wang Zhiyong, Liu Yingtao, Wang Xiaohu, Et al., Application of infrared thermography in research of radar absorbing coating defects, Journal of Aeronautical Materials, 32, 3, pp. 91-95, (2012)
12