TOPOLOGY OPTIMIZATION METHODOLOGY ON MULTI-JACKET STRUCTURE FOR OFFSHORE WIND TURBINE

被引：0
|
作者：
Zhang C. [1 ]
Zhang J. [1 ,2 ]
Long K. [1 ]
Lu F. [1 ]
Tao T. [1 ,3 ]
机构：
[1] State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing
[2] Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing
[3] China Southern Power Grid Technology Co.，Ltd., Guangzhou
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 06期
关键词：
maximum deformation; multi-objective optimization; offshore wind turbines; structural optimization;
D O I：
10.19912/j.0254-0096.tynxb.2022-0634
中图分类号：
学科分类号：
摘要：
To realize the conceptual design of multi- jacket structure for offshore wind turbine （OWT），modal analysis，load calculation，stiffness and strength study of in extreme working conditions were conducted for a 5 MW multi- jacket structure were conducted.. Based on its mechanical behavior，a multi-objective topology optimization（TO）formulationmodel for multi-jacket structure was proposed，by suppressing checkerboard patterns by imposing a minimum size restriction and adopting plane symmetry constraints. Thus the TO results by varying weighted with different weight factors were obtained. In terms of topological configuration under a specified weighted factor，the finite element model of a novel multi-jacket structure was providedre-established and load calculation was reanalyzed. By comparing the static and dynamic analysis results under ultimate loading cases，it can be observed that the first-order natural frequency of the optimized structure is slightly enhanced. Simultaneously，the maximum deformation and stress wereare greatly reduced. These results clearly confirmedconfirm the viability and superiority of the suggested TO procedure in the multi-jacket design of OWTs. © 2023 Science Press. All rights reserved.
引用
收藏
页码：495 / 500
页数：5
相关论文
共 23 条
  • [1] BENDSOE M P，, KIKUCHI N., Generating optimal topologies in structural design using a homogenization method［J］, Computer methods in applied mechanics and engineering, 71, 2, pp. 197-224, (1988)
  • [2] BENDSOE M P., Optimal shape design as a material distribution problem［J］, Structural and multidisciplinary optimization, 1, 4, pp. 193-202, (1989)
  • [3] ZHOU M，, ROZVANY G., The COC algorithm，part II：topological，geometry and generalized shape optimization ［J］, Computer methods in applied mechanics and engineering, 89, 1-3, pp. 309-336, (1991)
  • [4] XIE Y M, STEVEN G P., A simple evolutionary procedure for structural optimization［J］, Computer & structure, 49, 5, pp. 885-896, (1993)
  • [5] SUI Y K, YE H L., Continuum topology optimization methods ICM［M］, (2013)
  • [6] WANG M Y, WANG X M, GUO D M., A level set method for structural topology optimization［J］, Computer methods in applied mechanics and engineering, 192, 1-2, pp. 227-246, (2003)
  • [7] TOADER A M., A level- set method for shape optimization［J］, Comptes rendus mathematique, 334, 12, pp. 1125-1130, (2002)
  • [8] GUO X, ZHANG W S, ZHONG W L., Doing topology optimization explicitly and geometrically：a new moving morphable components based framework［J］, Journal of applied mechanics, 81, 8, (2014)
  • [9] ZHU J H, XIA L., Topology optimization in aircraft and aerospace structures design［J］, Archives of computational methods in engineering, 23, pp. 595-622, (2015)
  • [10] Giga-voxel computational morphogenesis for structural design ［J］, Nature, 550, pp. 84-86, (2017)
123