Biobased polymer nanocomposites prepared by in situ polymerization: comparison between carbon and mineral nanofillers

Two series based on poly(propylene 2,5-furandicarboxylate)-block-poly(tetramethylene oxide) (PPF-b-F-PTMO) containing carbon and mineral nanofillers that differ in shape (1D and 2D) were synthesized via in situ polymerization. The influence of the addition of the 1D-type nanoparticle, i.e., carbon nanofibers (CNFs) and halloysite nanotubes (HNTs), and the so-called 2D-type, i.e., graphene nanoplatelets (GNPs) and organoclay (C20A), on the properties of a biobased block copolymer was analyzed. The dispersion of nanoadditives in the nanocomposites was determined using a scanning electron microscope (SEM). The thermal properties were studied employing differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The introduction of nanoparticles increased the crystallinity (Xc) and the mean values of tensile modulus (E) of the bionanocomposites. In turn, one observed that the decrease in the limited viscosity number (LVN) was visible along with incorporating nanoadditives. The synthesized polymer bionanocomposites reveal the mechanical properties of elastomers during mechanical testing. Moreover, the good processability of the obtained materials by injection molding combined with the comprehensive ability to change mechanical and thermal properties of PPF-b-F-PTMO by tailoring the type and content of the nanofillers can indicate their possible applications in packaging, automotive, sports, construction, and many other industries.