Study of technologies and equipment of continuous hydraulic sand fracturing for permeability enhancement at high pressure side of coal mine downhole

被引：0

作者：

Jia B. ^{[1
,2
]}

Li S. ^{[2
]}

Chen D. ^{[1
]}

Lin H. ^{[2
]}

Zheng K. ^{[1
]}

Sun S. ^{[1
]}

Zhao J. ^{[1
]}

机构：

[1] Xi’an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an

[2] College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an

来源：

Meitiandizhi Yu Kantan/Coal Geology and Exploration | 2022年 / 50卷 / 08期

关键词：

gas extraction; high pressure side; hydraulic sand fracturing; Pansan Coal Mine in Huainan; underground coal mine;

D O I：

10.12363/issn.1001-1986.22.03.0191

中图分类号：

学科分类号：

摘要：

The technological concept of sand fracturing at the high pressure side is proposed against the present situation where the coal mine downhole operation space is small, the power and water supply capacities are limited, and the surface sand fracturing equipment cannot be applied directly in the coal mine downhole. On the basis of the principle of sand mixing and carrying through hydrodynamic impact, the continuous hydraulic sand fracturing equipment at the high pressure side was developed. Such equipment requires no external power source for sand mixing. It forms cyclone impact through the changes in the flow regime and flow field of the fracturing fluid to realize sand mixing and carrying. As indicated by the theoretical analysis, numerical simulation and indoor simulation test, this equipment is feasible in principles, and can effectively mix and carry sand. The developed equipment has the overall pressure resistance of 55 MPa, 750 kg quartz sand can be loaded at one time, and can realize the continuous sand fracturing for a single crossing borehole or multiple crossing boreholes. The associated 3-channel shunt continuous hydraulic sand fracturing control system at the high pressure side of the coal mine downhole was designed. This system uses the mine compressed air to realize the on/off action of the switch, and coordinates with the fracturing pump control system to realize the remote concentrated control over the sand adding process, so as to ensure the safety and reliability during sand adding. The equipment was applied to carry out the field test for 5 floor crossing boreholes at the Pansan Coal Mine in Huainan Mining Area, Anhui. As indicated by the results, this equipment has high sand carrying capacity, and effective sand adding can be realized by only opening Channel II, with the maximum continuous sand adding amount of 150 kg and the maximum injected water amount of 316 m3. The gas extraction scalar quantity of the sand fracturing borehole and the gas extraction quantity of the 100 m borehole were 2.38 and 2.03 times of that of the water fracturing borehole, respectively, showing significant effects in permeability enhancement. The developed equipment can be applied in the fields, such as the coal mine downhole highpressure water jetting, hydraulic cutting and hydraulic sand fracturing. Copyright © 2022 Meitiandizhi Yu Kantan/Coal Geology and Exploration

引用

页码：54 / 61

页数：7

共 18 条

[1] ZHANG Qun, GE Chungui, LI Wei, Et al., A new model and application of coalbed methane high efficiency production from broken soft and low permeable coal seam by roof strata–in horizontal well and staged hydraulic fracture[J], Journal of China Coal Society, 43, 1, pp. 150-159, (2018)
[2] XU Fengyin, YAN Xia, LIN Zhenpan, Et al., Research progress and development direction of key technologies for efficient coalbed methane development in China[J], Coal Geology & Exploration, 50, 3, pp. 1-14, (2022)
[3] YAO Yanbin, WANG Hui, YANG Yanhui, Et al., Evaluation of the hydro–fracturing potential for coalbed methane reservoir：A case study of Zhengzhuang CBM field[J], Coal Geology & Exploration, 49, 1, pp. 119-129, (2021)
[4] ZOU Caineng, YANG Zhi, DONG Dazhong, Et al., Formation，distribution and prospect of unconventional hydrocarbons in source rock strata in China[J], Earth Science, 47, 5, pp. 1517-1533, (2022)
[5] SUN Siqing, ZHANG Qun, YAN Zhiming, Et al., Practice of permeability enhancement through overall hydraulic fracturing of long hole in outburst–prone soft crushed coal seam with low permeability[J], Journal of China Coal Society, 42, 9, pp. 2337-2344, (2017)
[6] JIA Bingyi, CHEN Dongdong, WU Jie, Et al., Practice of enhanced gas extraction by staged fracturing with comb –shaped long hole in coal mine roof[J], Coal Geology & Exploration, 49, 2, pp. 70-76, (2021)
[7] ZHENG Kaige, Permeability improving technology by sectional hydraulic fracturing for comb−like long drilling in floor of crushed and soft coal seam with low permeability, Journal of Mining & Safety Engineering, 37, 2, pp. 272-281, (2020)
[8] CHEN Dongdong, SUN Siqing, ZHANG Jian, Et al., Technology system and engineering practice of coal seam permeability improvement through underground directional long borehole hydraulic fracturing[J], Coal Science and Technology, 48, 10, (2020)
[9] WANG Shengwei, XIONG Zhangkai, LYU Shuaifeng, Et al., Characteristics and significance of proppant in hydraulic fractures in coal reservoirs[J], Coal Geology & Exploration, 50, 3, pp. 137-145, (2022)
[10] WU Xiuping, ZHANG Qun, Research on controlling mechanism of fracture propagation of multi–stage hydraulic fracturing horizontal well in roof of broken soft and low permeability coal seam[J], Natural Gas Geoscience, 29, 2, pp. 268-276, (2018)

← 1 2 →