Minimum Return Power Control for Three-Level Dual Active Hybrid Full-Bridge DC-DC Converters

被引:0
|
作者
Tao H. [1 ,2 ]
Zhang J. [1 ]
Xiao Q. [1 ]
Zheng Z. [1 ,2 ]
机构
[1] School of Electrical Engineering and Automation, Henan Polytechnic University, Henan, Jiaozuo
[2] Henan International Joint Laboratory of Direct Drive and Control of Intelligent Equipment, Henan, Jiaozuo
关键词
backflow power; current stress; hybrid three-level full bridge (H-TLFB) DC-DC converter; phase shift control; transmission efficiency;
D O I
10.16183/j.cnki.jsjtu.2021.493
中图分类号
学科分类号
摘要
Hybrid three-level full bridge (H-TLFB) DC-DC converters increase the input voltage range by introducing a three-level bridge arm. Aimed at the problems of large power return and high current stress in the traditional dual phase shift control, a minimum return power control strategy is proposed. First, the power transmission characteristics of H-TLFB DC-DC converter are analyzed, the size of the return power value of the converter in two different operating modes is compared, and the optimal shift of the return power is calculated according to the mathematical relationship between the return power and the voltage ratio, the shift and the transmission power. The corresponding optimal shift of the return power is calculated, and the corresponding optimization control strategy is designed. Compared with the traditional dual phase shift control strategy, the return power in the minimum return power control strategy can reach the minimum value in the full power transmission range, and within a certain voltage ratio range, the return power and current stress can be optimized at the same time. Finally, the correctness and feasibility of the design control strategy are verified by experiments. © 2023 Shanghai Jiao Tong University. All rights reserved.
引用
收藏
页码:521 / 532
页数:11
相关论文
共 20 条
  • [1] DING Z, YANG C, ZHANG Z, Et al., A novel soft-switching multiport bidirectional DC-DC converter for hybrid energy storage system, IEEE Transactions on Power Electronics, 29, 4, pp. 1595-1609, (2013)
  • [2] KRISMER F, KOLAR J W., Efficiency-optimized high-current dual active bridge converter for automotive applications, IEEE Transactions on Industrial Electronics, 59, 7, pp. 2745-2760, (2011)
  • [3] SHI Y, LI R, XUE Y, Et al., Optimized operation of current-fed dual active bridge DC-DC converter for PV applications, IEEE Transactions on Industrial Electronics, 62, 11, pp. 6986-6995, (2015)
  • [4] KHERALUWALA M N, GASCOIGNE R W, DIVAN D M, Et al., Performance characterization of a high-power dual active bridge DC-to-DC converter, IEEE Transactions on Industry Applications, 28, 6, pp. 1294-1301, (1992)
  • [5] YIN Xiaodong, LUO Deng, LI Zuyong, Et al., A second-order ripple voltage suppression algorithm of bi-directional isolation DC-DC converter, Transactions of China Electrotechnical Society, 33, 6, pp. 1356-1363, (2018)
  • [6] ZHAO Biao, YU Qingguang, SUN Weixin, Bi-directional full-bridge DC-DC converters with dual-phase-shifting control and Its backflow power characteristic analysis, Proceedings of the CSEE, 32, 12, pp. 43-50, (2012)
  • [7] CHENG Hong, GAO Qiaomei, ZHU Jinbiao, Et al., Dynamic modeling and minimum backflow power controlling of the Bi-directional full-bridge DC-DC converters based on dual-phase-shifting control, Transactions of China Electrotechnical Society, 29, 3, pp. 245-253, (2014)
  • [8] AN Feng, SONG Wensheng, YANG Kexin, Multi-objective optimization control scheme based on extended phase-shift of dual-active-bridge DC-DC converters, Proceedings of the CSEE, 39, 3, pp. 822-831, (2019)
  • [9] GUO Huayue, ZHANG Xing, ZHAO Wenguang, Et al., Optimal control strategy of dual active bridge DC-DC converters with extended-phase-shift control, Proceedings of the CSEE, 39, 13, pp. 3889-3899, (2019)
  • [10] ZHAO B, SONG Q, LIU W, Et al., Current-stress-optimized switching strategy of isolated bidirectional DC-DC converter with dual-phase-shift control, IEEE Transactions on Industrial Electronics, 60, 10, pp. 4458-4467, (2012)