AERODYNAMIC RESPONSE ANALYSIS OF BACK-SWEPT WIND TURBINE BASED ON CO-SIMULATION

被引：0
|
作者：
Li H. [1 ]
Xia H. [1 ]
Li D. [1 ]
Wu J. [1 ]
机构：
[1] School of Mechanical and Electrical Engineering, Guangdong University of Technology, Guangzhou
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 07期
关键词：
aeroelastic coupling; back-swept blade; co-simulation; lift line; steady state response; wind turbines;
D O I：
10.19912/j.0254-0096.tynxb.2022-0338
中图分类号：
学科分类号：
摘要：
Because the back-swept blade is constructed by bending the stacking line，the elastic shaft and torsional shaft are separated which enhances the coupling effect of bending and torsional deformation and the nonlinear characteristics of structural deformation. Furthermore，there is an obvious three- dimensional flow phenomenon along the blade span wise. In order to accurately simulate the structural vibration，deformation and aerodynamic load of a swept wind turbine，the blade and tower structures of the wind turbine are discretized by the super element method，and the rigid- flexible coupling multi- body dynamics model of the whole wind turbine is established. Because the vibration and deformation of back-swept blade when operation should result in the three-dimensional air flow along the blade，the helical trailing vortex method is also applied to compute the aerodynamic load on the blade. In order to simulate the wind turbine with the coupling of mechanism and air fluid，the structural model of wind turbine is built by using the multi- body dynamics software，and the aerodynamic load is computed by the Matlab，and the Simulink with co- simulation function is used to integrate the structural model and aerodynamic model. Accordingly，the structural and aerodynamic response of the wind turbine with the back- swept blades is able to be analyzed in the co- simulation system. The numerical simulation results show that the theoretical model and the method presented in this paper can effectively simulate the nonlinear deformation and aero-elastic coupling characteristics of the back-swept wind turbine. It is useful to design the wind turbine with the back-swept blade and analyze its aero-elastic performance. © 2023 Science Press. All rights reserved.
引用
收藏
页码：447 / 455
页数：8
相关论文
共 22 条
  • [1] WANG Z F, LI D Y，, Et al., Research on effects of structure and aerodynamic characteristics of back-swept blade wind turbines［J］, Acta energiae solaris sinica, 41, 11, pp. 285-292, (2020)
  • [2] KANG C M, ZHANG W M., Study on the reduction of wind turbine blade load by the swept-torsion coupling［J］, Wind energy, 8, pp. 58-60, (2010)
  • [3] KANG C M, ZHANG W M., The twist angle design and optimization of large sweep twist blade［J］, Acta aerodynamica sinica, 29, 4, pp. 518-521, (2011)
  • [4] HANSEN M H., Aeroelastic instability problems for wind turbines［J］, Wind energy, 10, 6, pp. 551-577, (2007)
  • [5] GUO K X, LI D Y，, Et al., Unsteady aeroelastic coupling model and dynamic response analysis of back-swept blade on wind turbines［J］, Journal of mechanical engineering, 58, 4, pp. 174-182, (2022)
  • [6] WANG L, LIU X W，, KOLIOS A., State of the art in the aeroelasticity of wind turbine blades：aeroelastic modelling ［J］, Renewable and sustainable energy reviews, 64, pp. 195-210, (2016)
  • [7] LAGO L I, PONTA F L, OTERO A D., Analysis of alternative adaptive geometrical configurations for the NREL-5 MW wind turbine blade［J］, Renewable energy, 59, pp. 13-22, (2013)
  • [8] ZHOU X D, HUANG K F，, LI Z., Effects of bend- twist coupling on flutter limits of composite wind turbine blades ［J］, Composite structures, 192, pp. 317-326, (2018)
  • [9] WANG L, LIU X W，, RENEVIER N，, Et al., Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory［J］, Energy, 76, pp. 487-501, (2014)
  • [10] LIU J Y, HONG J Z., Study on dynamic modeling theory of rigid- flexible coupling systems［J］, Chinese journal of theoretical and applied mechanics, 3, pp. 408-415, (2002)
123