RESEARCH ON INFLUENCING FACTORS OF THERMAL CONDUCTIVITY OF THERMAL INSULATION CEMENT FOR GEOTHERMAL WELL

被引：0
|
作者：
Zhang F. [1 ]
Li L. [1 ]
Dai X. [2 ]
Dong Z. [1 ]
Han L. [1 ]
Wang B. [1 ]
机构：
[1] Chinese Academy of Geological Sciences, Beijing
[2] Geology Institute of China Chemical Geology and Mine Bureau, Beijing
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 09期
关键词：
geothermal energy; geothermal well; heat losses; influencing factors; thermal conductivity; thermal insulating materials;
D O I：
10.19912/j.0254-0096.tynxb.2022-0666
中图分类号：
学科分类号：
摘要：
This paper reveals the variation law of thermal conductivity of thermal insulation cement under various factors and the corresponding changes of micro characteristics on the basis of selecting appropriate test methods. The experimental results show that the thermal conductivity first decreases rapidly，and then the decline rate tends to be stable with the increase of the amount of insulation materials and the water cement ratio. The extension of curing time and the increase of curing temperature help to reduce the heat transfer capacity of the skeleton，but the thermal conductivity is basically stable after the curing temperature exceeds 120 ℃ in a same curing time and the curing time exceeds 7 d at a same temperature. And the increase of moisture content and test temperature can significantly improve the thermal conductivity by enhancing the heat transfer capacity of voids and skeletons. What’s more，the results of factor significance analysis show that the effect of moisture content is the most obvious，the test temperature and the amount of insulation material are the second，and the influence of water cement ratio is the lowest. The analysis results show that the low-density thermal insulation material can effectively reduce the thermal conductivity ，and the honeycomb like structure has great advantages in maintaining the strength of cement. In addition，cement within 15%-20% thermal insulation material can get better thermal insulation effect on the basis of ensuring reasonable compressive strength and economy. © 2023 Science Press. All rights reserved.
引用
收藏
页码：493 / 502
页数：9
相关论文
共 36 条
  • [1] DOU H P，, CHEN X H, ZHU P，, Et al., A model of temperature loss in the wellbore of geothermal exploitation for heating and its application［J］, Geology and exploration, 55, 5, pp. 1276-1286, (2019)
  • [2] HASAN A R, KABIR C S., Fluid flow and heat transfer in wellbore［M］, (2002)
  • [3] Heat loss to the surrounding rock formation from a geothermal wellbore ［J］, Geothermics, 26, 2, pp. 329-349, (1997)
  • [4] ZHOU F Z, ZHENG X H., Heat transfer in tubing-casing annulus during production process of geothermal systems ［J］, Journal ofearth science, 26, 1, pp. 116-123, (2015)
  • [5] LI X Y，, HE H P, DUAN Y Z，, Et al., Analysis on the thermal efficiency improvement process for geothermal well in porous sandstone［J］, Oil drilling & production technology, 39, 4, pp. 484-490, (2017)
  • [6] YANG S G., Thermal insulation casing completion technology design and field practice［J］, Technology supervision in petroleum industry, 35, 1, pp. 1-4, (2019)
  • [7] ZHU M, DUAN Y Z，, GAO X R，, Et al., Heat preservation suggestion and heat loss analysis of geothermal well［J］, Science & technology review, 33, 22, pp. 32-36, (2015)
  • [8] LI R X, WANG G S，, SONG X Z，, Et al., Numerical analysis of the effect of cement sheath on the heat extraction performance of coaxial borehole heat exchangers geothermal system［J］, Building science, 34, 4, pp. 36-40, (2018)
  • [9] Physical properties of G-class cement for geothermal well cementing in South Korea ［J］, Renewable energy, 80, pp. 123-131, (2015)
  • [10] FALCONE G., Estimation of cement thermal properties through the three-phase model with application to geothermal wells［J］, Energies, 11, 10, (2018)
1234