Hot deformation behavior of a new Al-Zn-Mg-Sc-Er-Zr alloy

被引：0
|
作者：
Tang Z. [1 ,2 ]
Xing Q. [1 ,2 ]
Yang S. [1 ,2 ]
Ding N. [3 ]
机构：
[1] AECC Beijing Institute of Aeronautical Materials, Beijing
[2] Beijing Advanced Engineering and Application Research Center of Aluminum Materials, Beijing
[3] The Sixth Military Representative Office in Beijing, Beijing
来源：
Cailiao Gongcheng/Journal of Materials Engineering | 2022年 / 50卷 / 03期
关键词：
Al-Zn-Mg-Sc-Er-Zr; Constitutive equation; Hot deformation; Hot processing map; Micro-structure evolution;
D O I：
10.11868/j.issn.1001-4381.2021.000319
中图分类号：
学科分类号：
摘要：
The hot deformation behavior of Al-8.9Zn-1.3Mg-0.1Sc-0.1Er-0.1Zr aluminum alloy was studied by Gleeble-3800 thermal simulator. The hot processing map of the alloy in the temperature range of 380-440 ℃ and strain rate range of 0.01-10 s-1 was established.The phase in the alloy was analyzed by XRD, SAED and EDS. The microstructure after hot deformation was observed by OM and TEM. The optimum range of hot working parameters is as follows: 400 ℃<T<440 ℃, 0.01 s-1<ε•<0.1 s-1. The main phase group of the alloy after deformation is α-Al and Al3(Sc, Er); The results show that the stress required for plastic deformation decreases with the increase of temperature and the decrease of strain rate, which is mainly due to the recrystallization and the decrease of pinning force of Al3 (Sc, Er) particles; the tendency of dynamic softening is greater at low strain rate, and the softening mechanism is changed from dynamic recovery to dynamic recrystallization; the formation of adiabatic shear band and dislocation stacking is the main reason for the instability of the alloy. © 2022, Journal of Materials Engineering. All right reserved.
引用
收藏
页码：131 / 137
页数：6
相关论文
共 23 条
  • [1] REN J, WANG R, FENG Y, Et al., Microstructure evolution and mechanical properties of an ultrahigh strength Al-Zn-Mg-Cu-Zr-Sc (7055) alloy processed by modified powder hot extrusion with post aging[J], Vacuum, 161, pp. 434-442, (2019)
  • [2] WANG Y, WU X, CAO L, Et al., Effect of trace Er on the microstructure and properties of Al-Zn-Mg-Cu-Zr alloys during heat treatments[J], Materials Science and Engineering: A, 792, (2020)
  • [3] ZHANG J, GAO Y, YANG C, Et al., Microalloying Al alloys with Sc: a review[J], Rare Metals, 39, 6, pp. 636-650, (2020)
  • [4] NIE Z R, WEN S P, HUANG H, Et al., Research progress of Er-containing aluminum alloy, The Chinese Journal of Nonferrous Metals, 21, 10, pp. 2361-2370, (2011)
  • [5] ZHANG J, WANG H, YI D, Et al., Comparative study of Sc and Er addition on microstructure, mechanical properties, and electrical conductivity of Al-0.2Zr-based alloy cables[J], Materials Characterization, 145, pp. 126-134, (2018)
  • [6] LE F, LI Y, JIANG F, Et al., On the role of Sc or Er micro-alloying in the microstructure evolution of Al-Mg alloy sheets during annealing[J], Materials Characterization, 157, (2019)
  • [7] LEFEBVRE W, BANOIX F, HALLEM H, Et al., Precipitation kinetic of Al<sub>3</sub>(Sc, Zr) dispersoids in aluminium, Journal of Alloys and Compounds, 470, 1, pp. 107-110, (2009)
  • [8] LI G, ZHAO N, LIU T, Et al., Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al-Zn-Mg-Sc-Zr alloys[J], Materials Science and Engineering: A, 617, pp. 219-227, (2014)
  • [9] WANG K, YIN D, ZHAO Y, Et al., Microstructural evolution upon heat treatments and its effect on corrosion in Al-Zn-Mg alloys containing Sc and Zr[J], Journal of Materials Research and Technology, 9, 3, pp. 5077-5089, (2020)
  • [10] LI Z, JIANG H, WANG Y, Et al., Effect of minor Sc addition on microstructure and stress corrosion cracking behavior of medium strength Al-Zn-Mg alloy[J], Journal of Materials Science & Technology, 34, 7, pp. 1172-1179, (2018)
123