Erection cylinder based on solid-liquid phase change of liquid metal

被引：0

作者：

Yan S. ^{[1
]}

Deng Y. ^{[1
]}

Su Z. ^{[1
]}

Jiang Y. ^{[1
]}

Wang D. ^{[1
]}

机构：

[1] School of Aerospace Engineering, Beijing Institute of Technology, Beijing

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2023年 / 42卷 / 15期

关键词：

erection cylinder; launch accuracy; liquid metal; load-bearing characteristics; phase change;

D O I：

10.13465/j.cnki.jvs.2023.15.003

中图分类号：

学科分类号：

摘要：

In inclined launching process of a missile, conventional hydraulic erection cylinder undergoes axial displacement due to bearing a huge load to aggravate vibration of launching device, and reduce launching accuracy and safety of missiles. Here, an erection cylinder based on solid-liquid phase change of liquid metal was proposed. It was shown that the erection cylinder can utilize the solid-liquid phase change principle of liquid metal; when metal is liquid, the erection cylinder can be freely adjusted up and down; when metal is solid, the erection cylinder can be locked and withstand large load. The study results of liquid metal erection cylinder showed that under action of the same load, displacement of piston rod as well as stress and deformation of cylinder barrel in liquid metal erection cylinder are smaller than those in conventional hydraulic erection cylinder, the larger the load, the larger the difference values between the two cases, and the better the load-bearing characteristics of liquid metal erection cylinder; when liquid metal erection cylinder is working, missile' s pitch angular velocity decreases by 9. 61 deg/s, and the minimum distance of missile box increases by 80 mm to effectively improve missile' s launch accuracy and safety; by cooling with water spray, solidification time of liquid metal in erection cylinder is 45 s; using a 5 kW heating film, melting time of liquid metal is 75 s; the study results have reference significance for improving launch accuracy and safety of missiles. © 2023 Chinese Vibration Engineering Society. All rights reserved.

引用

页码：15 / 22

页数：7

共 13 条

[1] LIU Hanchao, WANG Xuezhi, LI Min, Et al., Topology optimization of launcher bracket based on multi-body dynamics, Journal of Ballistics, 33, 1, pp. 11-15, (2021)
[2] LIU Xinxin, CHU Fulei, XU Hongbin, Influence of buffer device on initial disturbance of missile system [J], Acta Armamentarii, 34, 2, pp. 154-161, (2013)
[3] LI Min, WANG Xuezhi, LI Chao, Et al., Influence factors analysis of initial disturbance for inclined vehicle launcher [J], Journal of Projectiles, Rockets, Missiles and Guidance, 38, 5, pp. 121-125, (2018)
[4] PANX, JIANG Y, WEI X L, Et al., Study on initial disturbance of airborne missile's horizontal backward derailment under continuous gust, International Journal of Aerospace Engineering, 2019, (2019)
[5] YAO Jianjun, WANG Xiao, LIU Ning, Et al., Dynamic simulation analysis of rigid-flexible coupling of a missile launcher, Journal of Harbin Engineering University, 43, 10, pp. 1491-1498, (2022)
[6] WANG Huazheng, JIANG Yi, WANG Boman, Et al., Analysis of processing safety of canister-launched vehicle-missile, Journal of Projectiles, Rockets, Missiles and Guidance, 39, 3, pp. 58-62, (2019)
[7] YANG X H, TAN S C, HE Z Z, Et al., Finned heat pipe assisted low melting point metal PCM heat sink against extremely high power thermal shock, Energy Conversion and Management, 160, pp. 467-476, (2018)
[8] YANG X H, LIU J., Advances in liquid metal science and technology in chip cooling and thermal management, Advances in Heat Transfer, 50, pp. 187-300, (2018)
[9] WANG XL, GUO R, LIU J., Liquid metal based soft robotics: materials, designs, and applications, Advanced Materials Technologies, 4, 2, (2019)
[10] ZHANG M K, YAO S Y, RAO W., Transformable soft liquid metal micro/nanomaterials, Materials Science and Engineering: R: Reports, 138, pp. 1-35, (2019)

← 1 2 →