Application and prospect of additive manufacturing technology in manned space engineering

被引：0
|
作者：
Liu Y. [1 ]
Zhou J. [2 ]
Zhang X. [1 ]
机构：
[1] School of Astronautics, Beihang University, Beijing
[2] China Manned Space Agency, Beijing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2023年 / 49卷 / 01期
关键词：
additive manufacturing; in-orbit manufacturing; manned space; space applications; spacecraft;
D O I：
10.13700/j.bh.1001-5965.2022.0455
中图分类号：
学科分类号：
摘要：
In recent years, the application of additive manufacturing technology in manned space engineering has developed rapidly. This paper summarizes the additive manufacturing technologies used in manned space engineering, such as fused deposition modeling technology, selective laser melting technology, wire and arc additive manufacturing technology, thermal spraying additive technology, lunar soil additive manufacturing technology and their application fields. This paper also summarizes the application fields of additive manufacturing technology in on-orbit manufacturing of aircraft replacement parts, manufacturing of large truss and other components that are difficult to be manufactured or launched on the ground, and manufacturing of complex aircraft components.Finally, this study makes the case that in order to implement additive manufacturing in the future, a material system appropriate for manned space engineering must be developed. Additive manufacturing in a microgravity environment should be studied. Also, relevant processes should be developed in the future. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：83 / 91
页数：8
相关论文
共 47 条
  • [1] CLINTON R G., Overview of NASA initiatives in 3D printing and additive manufacturing, AIRTEC International Congress, (2014)
  • [2] 3D print, leading aerospace manufacturing into a new era: Documentary on the development of 3D print technology in the 211 factory of the first institute of China aerospace science and technology corporation
  • [3] Scientific and technical problems in the field of astronautics in 2020 were published
  • [4] YANG Y, SONG C J, FEI L., Application of fused deposition rapid prototyping technology and 3D scanning technology, Techniques of Automation and Applications, 33, 12, pp. 39-43, (2014)
  • [5] FANG L H, Research on 3D-printed materials of ABS based on FDM, pp. 2-3, (2016)
  • [6] CHEN S P, YI H P, LUO Z H, Et al., The 3D printing polymers and their printing technologies, Materials Reports, 30, 7, pp. 54-59, (2016)
  • [7] LI D C, LU Z L, TIAN X Y, Et al., Additive manufacturing-revolutionary technology for leading the aerospace manufacturing, Acta Aeronautica et Astronautica Sinica, 43, 4, (2022)
  • [8] WANG G, ZHAO W, LIU Y F, Et al., Review of space manufacturing technique and developments, Scientia Sinica: Physica, Mechanica & Astronomica, 50, 4, pp. 95-105, (2020)
  • [9] POP3D the 3D printer for use in space [EB/OL]
  • [10] LI J C, CHI B H, WANG D, Et al., Development of space on-orbit additive manufacturing technology and additive manufacturing realization of electronic functional components, Industrial Technology Innovation, 5, 4, pp. 46-49, (2018)
12345