An Improved Separately Excited Converter for Improving the Performance of Switched Reluctance Generator System

被引:0
|
作者
Ding W. [1 ]
Chen S. [1 ]
Li K. [1 ]
Song K. [1 ]
机构
[1] School of Electrical Engineering, Xi’an Jiaotong University, Xi’an
关键词
auxiliary circuit; improved separately excited converter; power generation performance; Switched reluctance generator;
D O I
10.19595/j.cnki.1000-6753.tces.210047
中图分类号
学科分类号
摘要
In order to improve the output performance of switched reluctance generator (SRG) system, an improved separately-excited converter for SRG is proposed in this paper to improve the output voltage and power in DC power generation application. An auxiliary circuit is inserted into the front end of the converter and integrated into the conventional asymmetrical bridge separately excited converter. By controlling the auxiliary switch in the auxiliary circuit, the excitation voltage and generation voltage can be increased, and the excitation and demagnetization process can be accelerated, thereby improving the power generation performance of SRG system. This paper analyzes the working mode of the improved separately excited converter, compares and simulates the different power generation performance of the improved converter and the conventional converter, and studies the influence of the conduction angle of the main switch and the auxiliary switch, the size of the auxiliary capacitance and the load capacitance on the performance of the power generation system. Finally, the power circuit of the improved converter is fabricated, and the experimental platform based on dSPACE is built. The simulation and experimental results show that the improved converter can significantly improve the generation voltage and power of the SRG system. The experimental results verify the correctness of the theoretical analysis and the effectiveness of the proposed improved separately excited converter. © 2022 Chinese Machine Press. All rights reserved.
引用
收藏
页码:3555 / 3565
页数:10
相关论文
共 29 条
  • [1] Kuang Sijian, Zhang Xiaoping, Liu Ping, Et al., Sensorless control method of switched reluctance motors based on location of phase inductance characteristic points, Transactions of China Electrotechnical Society, 35, 20, pp. 4296-4305, (2020)
  • [2] Qing Long, Wang Huimin, Ge Xinglai, A high efficiency torque ripple suppression method for switched reluctance motor, Transactions of China Electrotechnical Society, 35, 9, pp. 1912-1920, (2020)
  • [3] Xu Aide, Ren Ping, Chen Jiagui, Et al., Rotor position detection and error compensation of switched reluctance motor based on special inductance position, Transactions of China Electrotechnical Society, 35, 8, pp. 1613-1623, (2020)
  • [4] Kuang Sijian, Zhang Xiaoping, Zhang Zhu, Et al., Sensorless control of switched reluctance motor based on intersection angle compensation of phase inductor, Transactions of China Electrotechnical Society, 34, 23, pp. 4909-4917, (2019)
  • [5] Tian Dexiang, Qu Bingni, Song Jiancheng, Et al., An analytical method of PWM duty cycle for switched reluctance motors based on current chopping control, Transactions of China Electrotechnical Society, 34, 21, pp. 4449-4457, (2019)
  • [6] Wu Jiangling, Sun Xiaodong, Zhu Jianguo, Accurate torque modeling with PSO-based recursive robust LSSVR for a segmented-rotor switched reluctance motor, CES Transactions on Electrical Machines and Systems, 4, 2, pp. 96-104, (2020)
  • [7] Huang Xuanrui, Lin Zechuan, Xiao Xi, Four-quadrant force control with minimal ripple for linear switched reluctance machines, CES Transactions on Electrical Machines and Systems, 4, 1, pp. 27-34, (2020)
  • [8] Liang Jianing, Lee Dong-Hee, Xu Guoqing, Et al., Analysis of passive Boost power converter for three-phase SR drive, IEEE Transactions on Industrial Electronics, 57, 9, pp. 2961-2971, (2010)
  • [9] Chang Hung-Chun, Liaw Chang-Ming, On the front-end converter and its control for a battery powered switched-reluctance motor drive, IEEE Transactions on Power Electronics, 23, 4, pp. 2143-2156, (2008)
  • [10] Jain A K, Mohan N., SRM power converter for operation with high demagnetization voltage, IEEE Transactions on Industry Applications, 41, 5, pp. 1224-1231, (2005)