Research Progress in Surface Micro-nano Structure of Materials Prepared by Ultrafast Laser

被引：0
|
作者：
Xiao Q. [1 ]
Xu R. [1 ]
机构：
[1] School of Mechatronic Engineering, Xi'an Technological University, Xi'an
来源：
Xiao, Qiang (175230206@qq.com) | 1600年 / Chinese Mechanical Engineering Society卷 / 33期
关键词：
Biomimetic materials; Laser processing; Superhydrophobic; Surface micro-nano structure; Ultrafast laser;
D O I：
10.11933/j.issn.1007-9289.20200227001
中图分类号：
学科分类号：
摘要：
Ultrafast laser has the characteristics of short pulse width and high peak power. Compared with the long pulse, the thermal effect on the material is almost zero, which makes the use of ultrafast laser processing materials gradually paid attention to by the scientific community. This article reviews the mechanism of micro-nano structures produced on the surface of ultra-fast laser irradiation materials, and summarizes the main characteristics and performance of micro-nano structures on the surface of ultra-fast laser prepared materials. The two aspects of the processing technology are discussed, the formation of the surface structure of the material, the performance and the research conclusion are explained, and the advantages and disadvantages of each process are discussed. Finally, the latest development trends of ultrafast laser preparation of biomimetic functional surface and biomedical material surface are summarized, and the problems encountered in the future research and development of ultrafast laser preparation material surface micro-nano structure are prospected. © 2020, Editorial Office of CHINA SURFACE ENGINEERING. All right reserved.
引用
收藏
页码：1 / 17
页数：16
相关论文
共 71 条
  • [1] DAUSINGER F, LICHTNER F., Femtosecond technology for technical and medical applications, pp. 75-116, (2004)
  • [2] BISWAS S, KARTHIKEYAN A, KIETZIG A M., Effect of repetition rate on femtosecond laser-induced homogenous microstructures, Materials, 9, 12, pp. 1023-1038, (2016)
  • [3] BONSE J, HOHM S, ROSENFELD A, Et al., Sub-100 nm laser-induced periodic surface structures upon irradiation of titanium by Ti: Sapphire femtosecond laser pulses in air, Applied Physics A, 110, 3, pp. 547-551, (2013)
  • [4] AKHMANOV S A, VYSLOUKH V A, CHIRKIN A S., Optics of femtosecond laser pulses, (1992)
  • [5] YANG L, WEN M, CHEN J, Et al., TiMoN nano-grains embedded into thin MoSx-based amorphous matrix: A novel structure for superhardness and ultra-low wear, Applied Surface Science, 462, 21, pp. 127-133, (2018)
  • [6] CAPPELLI E, ORLANDO S, SCITI D, Et al., Ceramic surface modifications induced by pulsed laser treatment, Applied Surface Science, 154-155, pp. 682-688, (2000)
  • [7] ZHANG C, YAO J, LAN S, Et al., Effects of plasma confinement on the femtosecond laser ablation of silicon, Optics Communications, 308, pp. 54-63, (2013)
  • [8] LIU X, DU D, MOUROU G., Laser ablation and micromachining with ultrashort laser pulses, IEEE Journal of Quantum Electronics, 33, 10, pp. 1706-1716, (1997)
  • [9] YANG Y, YANG J, XUE L, Et al., Surface patterning on periodicity of femtosecond laser-induced ripples, Applied Physics Letters, 97, 14, pp. 3688-3692, (2010)
  • [10] PECHOLT B, VENDAN M, DONG Y Y, Et al., Ultrafast laser micromachining of 3C-SiC thin films for MEMS device fabrication, International Journal of Advanced Manufacturing Technology, 39, 3-4, pp. 239-250, (2008)
12345678