Seismic performance evaluation of composite structural system with separated gravity and lateral load resisting systems

被引：0
|
作者：
Li Z. [1 ]
Xu L. [1 ,2 ]
Tao M. [3 ]
机构：
[1] Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Tsinghua University, Beijing
[2] School of Transportation Science and Engineering, Beihang University, Beijing
[3] Beijing Engineering Research Center of Steel and Concrete Composite Structures, Tsinghua University, Beijing
来源：
Jianzhu Jiegou Xuebao/Journal of Building Structures | 2021年 / 42卷 / 02期
关键词：
Safety factor; Seismic performance evaluation; Separable composite structural system; Static pushover analysis; Structural damage assessment;
D O I：
10.14006/j.jzjgxb.2020.C139
中图分类号：
学科分类号：
摘要：
To improve the standardization degree, assembly construction efficiency, safety and durability of traditional steel structure systems in residential industrialization applications, a new composite structural system with separate gravity and lateral load resisting systems was proposed in this paper, and its seismic performance is analyzed and evaluated. Using a real high-rise residential building as the prototype, two structural systems, namely, the traditional composite frame-shear wall structure and the newly proposed composite structure, were designed and the corresponding finite element models were established based on the control criteria of the same elastic inter-story drift ratio limit under frequent earthquake. A comparative analysis of these two systems, focused on both the deformation and stress characteristics, was carried out using the static elastic-plastic pushover method. Their seismic performances were evaluated using the indicators such as the inter-story displacement, damage states of key components and safety factor. The results show that: the composite structural system with separate gravity and lateral load resisting systems has a bending-type lateral deformation pattern, and the plastic hinges mostly appears at the bottom column end during the pushover process. By contrast, the traditional composite frame-shear wall structure has a bending-shear mixed type lateral deformation pattern, and the plastic hinges mostly appears at the beam ends. The two criteria of shear wall damage adopted in this paper are both applicable to identifying the ultimate state of two structure schemes. When controlled by the same inter-story drift design criterion, the composite structure system with separate gravity and lateral load resisting systems has a higher safety factor and thus a larger safety margin, compared with the traditional system. © 2021, Editorial Office of Journal of Building Structures. All right reserved.
引用
收藏
页码：15 / 26
页数：11
相关论文
共 24 条
  • [1] NI Zhen, ZHAO Yue, LIU Xuechun, ZHANG Ailin, Research on bearing capacity performance of the truss girder in the modular prefabricated steel structure, Industrial Construction, 44, 8, pp. 14-18, (2014)
  • [2] ZHANG Ailin, ZHANG Yanxia, ZHAO Wei, FEI Chenchao, Pseudo dynamic tests for a resilient prefabricated prestressed steel frame, Journal of Vibration and Shock, 35, 5, pp. 207-215, (2016)
  • [3] HAO Jiping, SUN Xiaoling, XUE Qiang, FAN Chunlei, Research and applications of prefabricated steel structure building systems, Engineering Mechanics, 34, 1, pp. 1-13, (2017)
  • [4] GUO Yanlin, WANG Xiaoan, JIANG Leixin, Design theory of assembled buckling-restrained braces and buckling-restrained braced frames, Structural Engineers, 26, 6, pp. 164-176, (2010)
  • [5] LIU Xuechun, PU Shuanghui, XU Axin, Et al., Experimental study on static and seismic performance of bolted joint in modularized multi-layer and high-rise prefabricated steel structures, Journal of Building Structures, 36, 12, pp. 43-51, (2015)
  • [6] Code for anti-collapse design of building structures: CECS 392: 2014, (2014)
  • [7] XIONG Chen, LU Xinzheng, LIN Xuchuan, Damage assessment of shear wall components for RC frame-shear wall buildings using story curvature as engineering demand parameter, Engineering Structures, 189, 12, pp. 77-88, (2019)
  • [8] FERNANDO Gomez-Martinez, ADOLFO Alonso-Dura, FLAVIA DE Luca, GERARDO M Verderame GERARDO M Verderame, Seismic performances and behaviour factor of wide-beam and deep-beam RC frames, Engineering Structures, 125, 20, pp. 107-123, (2016)
  • [9] Code for seismic design of buildings: GB 50011-2010, (2010)
  • [10] Code for design of composite structures: JGJ 138-2016, (2016)
123