Chaotic mixing and droplet dispersion characteristics of liquid-liquid with elastic combined impeller

被引：0
|
作者：
Liu Z. [1 ]
Wang C. [1 ]
Sun W. [1 ]
Tao C. [1 ]
Wang Y. [2 ]
机构：
[1] School of Chemistry and Chemical Engineering, Chongqing University, Chongqing
[2] Department of Chemical Engineering, Tsinghua University, Beijing
来源：
Liu, Zuohua (liuzuohua@cqu.edu.cn) | 1600年 / Materials China卷 / 71期
关键词：
D[!sub]32[!/sub; Elastic combined impeller; Lyapunov exponent; Mixer-settler; Mixing; Multiscale entropy; Particle size distribution;
D O I：
10.11949/0438-1157.20200675
中图分类号：
学科分类号：
摘要：
Traditional mixing and clarification tanks generally use rigid stirring blades to achieve liquid-liquid two-phase mixed extraction, which generally suffers from low efficiency and high energy consumption. A kind of elastic combined impeller was used in the mixing clarifier in this work to enhance the liquid-liquid biphase mixing behavior. Lyapunov exponent (LLE) and multiscale entropy (MSE) were used to characterize the chaotic state of the system, the particle size distribution and D32 were used to characterize the dispersion effect. The influence of impeller type (elastic combined impeller, rigid-flexible combined impeller and rigid impeller), spring length, wire diameter and outer diameter on mixing effect was studied. The results indicated that compared with the rigid impeller and the rigid-flexible combined impeller, the elastic combined impeller strengthens the energy dissipation mode of the flow field through the deformation and energy storage of the spring, improves the dispersion effect of the dispersed phase, and was conducive to the chaotic mixing of the liquid-liquid biphase. When stirring speed N = 200 r/min, the spring wire diameter was 0.6 mm, the relative length of the spring was 1.2, and the external diameter of the spring was 7 mm, the LLE value and the amplitude of MSE were the largest and the MSE values fluctuate most strongly. At the same time, there was a log-linear relationship between the D32 of dispersed phase and the stirring speed in each stirring system, and the droplet size of dispersed phase in the elastic combined impeller system was smaller and more. © 2020, Chemical Industry Press Co., Ltd. All right reserved.
引用
收藏
页码：4611 / 4620
页数：9
相关论文
共 43 条
  • [1] Yuan X J, Gan A H, Tian G L, Et al., Structure packed column technology and its applications, Petrochemical Design, 13, 2, (1996)
  • [2] Fei W Y, Wen X M, Chen D H, Et al., Characteristics of design and application of packed extraction tower, Petroleum Refinery Engineering, 28, 2, pp. 49-52, (1998)
  • [3] Xia Q, Chen C G., Principles of Chemical Engineering (Ⅱ), (2005)
  • [4] Srilatha C, Savant A R, Patwardhan A W, Et al., Head-flow characteristics of pump-mix mixers, Chemical Engineering & Processing: Process Intensification, 47, 9, pp. 1678-1692, (2008)
  • [5] Schlesinger M E, King M J, Sole K C, Et al., Extractive Metallurgy of Copper, (2011)
  • [6] Singh K K, Mahajani S M, Shenoy K T, Et al., CFD modeling of pump-mix action in continuous flow stirred tank, American Institute of Chemical Engineers Journal, 54, 1, pp. 42-55, (2010)
  • [7] Singh K K, Mahajani S M, Shenoy K T, Et al., CFD modeling of pilot-scale pump-mixer: single-phase head and power characteristics, Chemical Engineering Science, 62, 5, pp. 1308-1322, (2007)
  • [8] Shahcheraghi S H, Khayati G R, Ranjbar M., Improved dynamic modeling and simulation of an industrial copper solvent extraction process, Hydrometallurgy, 166, pp. 266-278, (2016)
  • [9] Ye S S, Tang Q, Qiao J S, Et al., Physical properties measurements and CFD simulations in settler of different P507-kerosene systems, CIESC Journal, 67, 2, pp. 458-468, (2016)
  • [10] Sadeghi R, Mohebbi A, Sarrafi A, Et al., CFD simulation and optimization of the settler of an industrial copper solvent extraction plant: a case study, Hydrometallurgy, 106, 3, pp. 148-158, (2011)
12345