Influence of longitudinal joint rotation on deformation of shield tunnel lining

被引：0
|
作者：
Li H. [1 ,2 ]
Huang X. [1 ,2 ]
Zhang Z. [1 ,2 ]
机构：
[1] Department of Geotechnical Engineering, Tongji University, Shanghai
[2] Key Laboratory of Geotechnical and Underground Engineering, Tongji University, Ministry of Education, Shanghai
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2023年 / 55卷 / 02期
关键词：
convergence deformation; joint rotation; longitudinal joint; shield tunnel;
D O I：
10.11918/202205007
中图分类号：
学科分类号：
摘要：
In order to study the influence of longitudinal joints on the convergence deformation of shield tunnel lining, the ratio of the convergence deformation caused by longitudinal joint rotation to the overall convergence deformation was introduced as an index to quantify the impacts of longitudinal joints on convergence deformation. On the basis of the initial assembling angle of longitudinal joints and the geometric recurrence relationship between joints, a simple algorithm for calculating convergence deformation caused by longitudinal joints in shield tunnel lining was proposed. First, the effectiveness of the proposed simple algorithm was verified by comparing with the results of existing multi-scale hybrid analysis. Then, with the results of full-scale loading test and 3D numerical simulation, the simple algorithm was applied to analyze the changes in the influence of longitudinal joints considering factors such as persistent/staggered fabrication, joint position, lining longitudinal force, and alternating loading and unloading. Results show that for persistently fabricated lining, the convergence deformation caused by joint rotation played a dominant role in the overall deformation, while staggered fabrication significantly reduced the influence of longitudinal joint rotation on the convergence deformation. The closer the joint was located to the maximum bending moment area, the greater the influence of longitudinal joint on the convergence deformation was. The increase in the longitudinal force enhanced the integrity of the segment, so the joint rotation-induced convergence deformation decreased with increasing longitudinal force. During the unloading process after loading, the influence of the longitudinal joint increased as the elastic self-deformation of segments could be recovered but the joint rotation-induced deformation retained. The research findings can provide useful guidance on segment structure design and tunnel health status evaluation in practical engineering. © 2023 Harbin Institute of Technology. All rights reserved.
引用
收藏
页码：70 / 79
页数：9
相关论文
共 20 条
  • [1] WANG Rulu, Structural safety analysis of Shanghai rail transit tunnel, Underground Engineering and Tunnels, 4, (2011)
  • [2] YAN Jingya, WANG Rulu, Cause analysis and typical characteristics of settlement and transverse convergence deformation of metro tunnel in soft ground in Shanghai, Journal of Natural Disasters, 27, 4, (2018)
  • [3] YANG Bo, TAN Yong, Influence of deep excavation on adjacent tunnel in soil-rock mixture, Journal of Harbin Institute of Technology, 53, 11, (2021)
  • [4] WANG Rulu, Analysis of influencing factors and deformation characteristics of Shanghai soft soil railway tunnel, Underground Engineering and Tunnels, 1, (2009)
  • [5] BLOM C., Design philosophy of concrete linings for tunnels in soft soils, (2002)
  • [6] ZHANG J, MANG H, LIU X, Et al., On a nonlinear hybrid method for multiscale analysis of a bearing-capacity test of a real-scale segmental tunnel ring, International Journal for Numerical and Analytical Methods in Geomechanics, 43, 14, (2019)
  • [7] WANG Rulu, ZHANG Dongmei, Mechanism of transverse deformation and assessment index for shield tunnels in soft clay under surface surcharge, Chinese Journal of Geotechnical Engineering, 35, 6, (2013)
  • [8] ZENG Gehua, Optimization study on layout scheme of segment ring joint in shield tunnel, Highway, 64, 12, (2019)
  • [9] XIE Jiachong, WANG Jinchang, ZHOU Gaoyun, Et al., Influence of soil parameters on response of shield tunnel lining considering soil-structure interaction, Tunnel Construction, 41, (2021)
  • [10] HE C, ZHOU S, DI H, Et al., Effect of longitudinal joint on train-induced vibrations from subway shield-driven tunnels in a homogeneous half-space, International Journal of Transportation Science and Technology, 11, 2, (2021)
12